lkml.org 
[lkml]   [2018]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.18 085/136] net: phy: xgmiitorgmii: Check read_status results
Date
From: Brandon Maier <brandon.maier@rockwellcollins.com>

[ Upstream commit 8d0752d11312be830c33e84dfd1016e6a47c2938 ]

We're ignoring the result of the attached phy device's read_status().
Return it so we can detect errors.

Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
drivers/net/phy/xilinx_gmii2rgmii.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/xilinx_gmii2rgmii.c b/drivers/net/phy/xilinx_gmii2rgmii.c
index 2e5150b0b8d5..449b31319010 100644
--- a/drivers/net/phy/xilinx_gmii2rgmii.c
+++ b/drivers/net/phy/xilinx_gmii2rgmii.c
@@ -40,8 +40,11 @@ static int xgmiitorgmii_read_status(struct phy_device *phydev)
{
struct gmii2rgmii *priv = phydev->priv;
u16 val = 0;
+ int err;

- priv->phy_drv->read_status(phydev);
+ err = priv->phy_drv->read_status(phydev);
+ if (err < 0)
+ return err;

val = mdiobus_read(phydev->mdio.bus, priv->addr, XILINX_GMII2RGMII_REG);
val &= ~XILINX_GMII2RGMII_SPEED_MASK;
--
2.17.1
\
 
 \ /
  Last update: 2018-09-17 05:32    [W:0.637 / U:3.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site