lkml.org 
[lkml]   [2018]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 28/35] mtd: rawnand: allow exiting immediately nand_scan_ident()
On Fri, 20 Jul 2018 17:15:20 +0200
Miquel Raynal <miquel.raynal@bootlin.com> wrote:

> Some driver (eg. docg4) will need to handle themselves the
> identification phase. As part of the migration to use nand_scan()
> everywhere (which will unconditionnaly call nand_scan_ident()), we add
> a condition at the start of nand_scan_ident() to just "do nothing" if
> the maxchips parameters is zero, meaning that the driver does not want
> the core to handle this phase.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
> drivers/mtd/nand/raw/nand_base.c | 10 +++++++++-
> 1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
> index dea41fa25be1..e7f135c100c2 100644
> --- a/drivers/mtd/nand/raw/nand_base.c
> +++ b/drivers/mtd/nand/raw/nand_base.c
> @@ -5926,7 +5926,7 @@ static int nand_dt_init(struct nand_chip *chip)
> /**
> * nand_scan_ident - [NAND Interface] Scan for the NAND device
> * @mtd: MTD device structure
> - * @maxchips: number of chips to scan for
> + * @maxchips: number of chips to scan for, returns immediately if 0
> * @table: alternative NAND ID table
> *
> * This is the first phase of the normal nand_scan() function. It reads the
> @@ -5940,6 +5940,14 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
> struct nand_chip *chip = mtd_to_nand(mtd);
> int ret;
>
> + /*
> + * If the number of chips to scan for is null, just return silently.

^ zero


> + * This is for specific drivers that must handle this part of the
> + * probe process themselves (e.g docg4).
> + */

I think that description of the special case maxchips == 0 should be
placed in the kernel doc header.

> + if (!maxchips)
> + return 0;

Can we move this check in nand_scan_with_ids()?

> +
> /* Enforce the right timings for reset/detection */
> onfi_fill_data_interface(chip, NAND_SDR_IFACE, 0);
>

\
 
 \ /
  Last update: 2018-07-22 10:50    [W:1.172 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site