lkml.org 
[lkml]   [2018]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 20/35] mtd: rawnand: sh_flctl: convert driver to nand_scan()
On Fri, 20 Jul 2018 17:15:12 +0200
Miquel Raynal <miquel.raynal@bootlin.com> wrote:

> Two helpers have been added to the core to make ECC-related
> configuration between the detection phase and the final NAND scan. Use
> these hooks and convert the driver to just use nand_scan() instead of
> both nand_scan_ident() and nand_scan_tail().
>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

> ---
> drivers/mtd/nand/raw/sh_flctl.c | 19 ++++++++-----------
> 1 file changed, 8 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c
> index d37d1d3ccbf9..663c75005ac9 100644
> --- a/drivers/mtd/nand/raw/sh_flctl.c
> +++ b/drivers/mtd/nand/raw/sh_flctl.c
> @@ -1002,10 +1002,10 @@ static void flctl_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
> flctl->index += len;
> }
>
> -static int flctl_chip_init_tail(struct mtd_info *mtd)
> +static int flctl_chip_attach_chip(struct nand_chip *chip)
> {
> + struct mtd_info *mtd = nand_to_mtd(chip);
> struct sh_flctl *flctl = mtd_to_flctl(mtd);
> - struct nand_chip *chip = &flctl->chip;
>
> if (chip->options & NAND_BUSWIDTH_16) {
> /*
> @@ -1073,6 +1073,10 @@ static int flctl_chip_init_tail(struct mtd_info *mtd)
> return 0;
> }
>
> +static const struct nand_controller_ops flctl_nand_controller_ops = {
> + .attach_chip = flctl_chip_attach_chip,
> +};
> +
> static irqreturn_t flctl_handle_flste(int irq, void *dev_id)
> {
> struct sh_flctl *flctl = dev_id;
> @@ -1200,15 +1204,8 @@ static int flctl_probe(struct platform_device *pdev)
>
> flctl_setup_dma(flctl);
>
> - ret = nand_scan_ident(flctl_mtd, 1, NULL);
> - if (ret)
> - goto err_chip;
> -
> - ret = flctl_chip_init_tail(flctl_mtd);
> - if (ret)
> - goto err_chip;
> -
> - ret = nand_scan_tail(flctl_mtd);
> + nand->dummy_controller.ops = &flctl_nand_controller_ops;
> + ret = nand_scan(flctl_mtd, 1);
> if (ret)
> goto err_chip;
>

\
 
 \ /
  Last update: 2018-07-21 19:51    [W:0.260 / U:0.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site