lkml.org 
[lkml]   [2018]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 18/35] mtd: rawnand: s3c2410: convert driver to nand_scan()
On Fri, 20 Jul 2018 17:15:10 +0200
Miquel Raynal <miquel.raynal@bootlin.com> wrote:

> Two helpers have been added to the core to make ECC-related
> configuration between the detection phase and the final NAND scan. Use
> these hooks and convert the driver to just use nand_scan() instead of
> both nand_scan_ident() and nand_scan_tail().
>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

> ---
> drivers/mtd/nand/raw/s3c2410.c | 30 +++++++++++++-----------------
> 1 file changed, 13 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/s3c2410.c b/drivers/mtd/nand/raw/s3c2410.c
> index e8bf64832213..c21e8892394a 100644
> --- a/drivers/mtd/nand/raw/s3c2410.c
> +++ b/drivers/mtd/nand/raw/s3c2410.c
> @@ -915,20 +915,19 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
> }
>
> /**
> - * s3c2410_nand_update_chip - post probe update
> - * @info: The controller instance.
> - * @nmtd: The driver version of the MTD instance.
> + * s3c2410_nand_attach_chip - Init the ECC engine after NAND scan
> + * @chip: The NAND chip
> *
> - * This routine is called after the chip probe has successfully completed
> - * and the relevant per-chip information updated. This call ensure that
> + * This hook is called by the core after the identification of the NAND chip,
> + * once the relevant per-chip information is up to date.. This call ensure that
> * we update the internal state accordingly.
> *
> * The internal state is currently limited to the ECC state information.
> */
> -static int s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
> - struct s3c2410_nand_mtd *nmtd)
> +static int s3c2410_nand_attach_chip(struct nand_chip *chip)
> {
> - struct nand_chip *chip = &nmtd->chip;
> + struct mtd_info *mtd = nand_to_mtd(chip);
> + struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
>
> switch (chip->ecc.mode) {
>
> @@ -998,6 +997,10 @@ static int s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
> return 0;
> }
>
> +static const struct nand_controller_ops s3c24xx_nand_controller_ops = {
> + .attach_chip = s3c2410_nand_attach_chip,
> +};
> +
> static const struct of_device_id s3c24xx_nand_dt_ids[] = {
> {
> .compatible = "samsung,s3c2410-nand",
> @@ -1095,6 +1098,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
> platform_set_drvdata(pdev, info);
>
> nand_controller_init(&info->controller);
> + info->controller.ops = &s3c24xx_nand_controller_ops;
>
> /* get the clock source and enable it */
>
> @@ -1166,15 +1170,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
> mtd->dev.parent = &pdev->dev;
> s3c2410_nand_init_chip(info, nmtd, sets);
>
> - err = nand_scan_ident(mtd, (sets) ? sets->nr_chips : 1, NULL);
> - if (err)
> - goto exit_error;
> -
> - err = s3c2410_nand_update_chip(info, nmtd);
> - if (err < 0)
> - goto exit_error;
> -
> - err = nand_scan_tail(mtd);
> + err = nand_scan(mtd, sets ? sets->nr_chips : 1);
> if (err)
> goto exit_error;
>

\
 
 \ /
  Last update: 2018-07-21 19:40    [W:1.215 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site