lkml.org 
[lkml]   [2018]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 12/35] mtd: rawnand: lpc32xx_slc: convert driver to nand_scan()
On Fri, 20 Jul 2018 17:15:04 +0200
Miquel Raynal <miquel.raynal@bootlin.com> wrote:

> Two helpers have been added to the core to make ECC-related
> configuration between the detection phase and the final NAND scan. Use
> these hooks and convert the driver to just use nand_scan() instead of
> both nand_scan_ident() and nand_scan_tail().
>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

> ---
> drivers/mtd/nand/raw/lpc32xx_slc.c | 77 +++++++++++++++++++++-----------------
> 1 file changed, 42 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/lpc32xx_slc.c b/drivers/mtd/nand/raw/lpc32xx_slc.c
> index 42820aa1abab..a4e8b7e75135 100644
> --- a/drivers/mtd/nand/raw/lpc32xx_slc.c
> +++ b/drivers/mtd/nand/raw/lpc32xx_slc.c
> @@ -779,6 +779,46 @@ static struct lpc32xx_nand_cfg_slc *lpc32xx_parse_dt(struct device *dev)
> return ncfg;
> }
>
> +static int lpc32xx_nand_attach_chip(struct nand_chip *chip)
> +{
> + struct mtd_info *mtd = nand_to_mtd(chip);
> + struct lpc32xx_nand_host *host = nand_get_controller_data(chip);
> +
> + /* OOB and ECC CPU and DMA work areas */
> + host->ecc_buf = (uint32_t *)(host->data_buf + LPC32XX_DMA_DATA_SIZE);
> +
> + /*
> + * Small page FLASH has a unique OOB layout, but large and huge
> + * page FLASH use the standard layout. Small page FLASH uses a
> + * custom BBT marker layout.
> + */
> + if (mtd->writesize <= 512)
> + mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
> +
> + /* These sizes remain the same regardless of page size */
> + chip->ecc.size = 256;
> + chip->ecc.bytes = LPC32XX_SLC_DEV_ECC_BYTES;
> + chip->ecc.prepad = 0;
> + chip->ecc.postpad = 0;
> +
> + /*
> + * Use a custom BBT marker setup for small page FLASH that
> + * won't interfere with the ECC layout. Large and huge page
> + * FLASH use the standard layout.
> + */
> + if ((chip->bbt_options & NAND_BBT_USE_FLASH) &&
> + mtd->writesize <= 512) {
> + chip->bbt_td = &bbt_smallpage_main_descr;
> + chip->bbt_md = &bbt_smallpage_mirror_descr;
> + }
> +
> + return 0;
> +}
> +
> +static const struct nand_controller_ops lpc32xx_nand_controller_ops = {
> + .attach_chip = lpc32xx_nand_attach_chip,
> +};
> +
> /*
> * Probe for NAND controller
> */
> @@ -884,41 +924,8 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
> }
>
> /* Find NAND device */
> - res = nand_scan_ident(mtd, 1, NULL);
> - if (res)
> - goto release_dma;
> -
> - /* OOB and ECC CPU and DMA work areas */
> - host->ecc_buf = (uint32_t *)(host->data_buf + LPC32XX_DMA_DATA_SIZE);
> -
> - /*
> - * Small page FLASH has a unique OOB layout, but large and huge
> - * page FLASH use the standard layout. Small page FLASH uses a
> - * custom BBT marker layout.
> - */
> - if (mtd->writesize <= 512)
> - mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
> -
> - /* These sizes remain the same regardless of page size */
> - chip->ecc.size = 256;
> - chip->ecc.bytes = LPC32XX_SLC_DEV_ECC_BYTES;
> - chip->ecc.prepad = chip->ecc.postpad = 0;
> -
> - /*
> - * Use a custom BBT marker setup for small page FLASH that
> - * won't interfere with the ECC layout. Large and huge page
> - * FLASH use the standard layout.
> - */
> - if ((chip->bbt_options & NAND_BBT_USE_FLASH) &&
> - mtd->writesize <= 512) {
> - chip->bbt_td = &bbt_smallpage_main_descr;
> - chip->bbt_md = &bbt_smallpage_mirror_descr;
> - }
> -
> - /*
> - * Fills out all the uninitialized function pointers with the defaults
> - */
> - res = nand_scan_tail(mtd);
> + chip->dummy_controller.ops = &lpc32xx_nand_controller_ops;
> + res = nand_scan(mtd, 1);
> if (res)
> goto release_dma;
>

\
 
 \ /
  Last update: 2018-07-21 17:29    [W:0.285 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site