lkml.org 
[lkml]   [2018]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/6] irqchip: sifive-plic: Add warning in plic_init() if handler already present
Date
We have two enteries (one for M-mode and another for S-mode) in the
interrupts-extended DT property of PLIC DT node for each HART. It is
expected that firmware/bootloader will set M-mode HWIRQ line of each
HART to 0xffffffff (i.e. -1) in interrupts-extended DT property
because Linux runs in S-mode only.

If firmware/bootloader is buggy then it will not correctly update
interrupts-extended DT property which might result in a plic_handler
configured twice. This patch adds a warning in plic_init() if a
plic_handler is already marked present. This warning provides us
a hint about incorrectly updated interrupts-extended DT property.

Signed-off-by: Anup Patel <anup@brainfault.org>
---
drivers/irqchip/irq-sifive-plic.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index d4433399eb89..3d4f205f8abe 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -234,6 +234,11 @@ static int __init plic_init(struct device_node *node,

cpu = riscv_hartid_to_cpuid(hartid);
handler = per_cpu_ptr(&plic_handlers, cpu);
+ if (handler->present) {
+ pr_warn("handler not available for context %d.\n", i);
+ continue;
+ }
+
handler->present = true;
handler->hart_base =
plic.regs + CONTEXT_BASE + i * CONTEXT_PER_HART;
--
2.17.1
\
 
 \ /
  Last update: 2018-11-30 09:03    [W:0.160 / U:2.936 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site