lkml.org 
[lkml]   [2018]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 310/361] media: adv7604: when the EDID is cleared, unconfigure CEC as well
Date
4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit e7da89926f6dc6cf855f5ffdf79ef99a1b115ca7 upstream.

When there is no EDID the CEC adapter should be unconfigured as
well. So call cec_phys_addr_invalidate() when this happens.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org> # for v4.18 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/media/i2c/adv7604.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -2284,8 +2284,10 @@ static int adv76xx_set_edid(struct v4l2_
state->aspect_ratio.numerator = 16;
state->aspect_ratio.denominator = 9;

- if (!state->edid.present)
+ if (!state->edid.present) {
state->edid.blocks = 0;
+ cec_phys_addr_invalidate(state->cec_adap);
+ }

v4l2_dbg(2, debug, sd, "%s: clear EDID pad %d, edid.present = 0x%x\n",
__func__, edid->pad, state->edid.present);

\
 
 \ /
  Last update: 2018-11-12 00:51    [W:1.086 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site