lkml.org 
[lkml]   [2018]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 10/16] iio: adc: sun4i-gpadc-iio: add support for A83T thermal sensor
On Mon, Jan 29, 2018 at 12:29:13AM +0100, Philipp Rossak wrote:
> This patch adds support for the A83T ths sensor.
>
> The A83T supports interrupts. The interrupt is configured to update the
> the sensor values every second.
>
> Signed-off-by: Philipp Rossak <embed3d@gmail.com>
> ---
> drivers/iio/adc/sun4i-gpadc-iio.c | 38 ++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/sun4i-gpadc.h | 18 ++++++++++++++++++
> 2 files changed, 56 insertions(+)
>
> diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
> index 8196203d65fe..9f7895ba1966 100644
> --- a/drivers/iio/adc/sun4i-gpadc-iio.c
> +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
> @@ -170,6 +170,40 @@ static const struct gpadc_data sun8i_h3_ths_data = {
> SUN8I_H3_THS_TEMP_PERIOD(0x7),
> };
>
> +static const struct gpadc_data sun8i_a83t_ths_data = {
> + .temp_offset = -2724,
> + .temp_scale = -70,
> + .temp_data = {SUN8I_H3_THS_TDATA0,
> + SUN8I_A83T_THS_TDATA1,
> + SUN8I_A83T_THS_TDATA2,
> + 0},
> + .sample_start = sunxi_ths_sample_start,
> + .sample_end = sunxi_ths_sample_end,
> + .sensor_count = 3,
> + .supports_nvmem = false,
> + .support_irq = true,
> + .ctrl0_map = SUN4I_GPADC_CTRL0_T_ACQ(0x1f3),
> + .ctrl2_map = SUN8I_H3_THS_ACQ1(0x1f3),

Where are these values coming from?

> + .sensor_en_map = SUN8I_H3_THS_TEMP_SENSE_EN0 |
> + SUN8I_A83T_THS_TEMP_SENSE_EN1 |
> + SUN8I_A83T_THS_TEMP_SENSE_EN2,
> + .filter_map = SUN4I_GPADC_CTRL3_FILTER_EN |
> + SUN4I_GPADC_CTRL3_FILTER_TYPE(0x2),
> + .irq_clear_map = SUN8I_H3_THS_INTS_ALARM_INT_0 |
> + SUN8I_A83T_THS_INTS_ALARM_INT_1 |
> + SUN8I_A83T_THS_INTS_ALARM_INT_2 |
> + SUN8I_H3_THS_INTS_SHUT_INT_0 |
> + SUN8I_A83T_THS_INTS_SHUT_INT_1 |
> + SUN8I_A83T_THS_INTS_SHUT_INT_2 |
> + SUN8I_H3_THS_INTS_TDATA_IRQ_0 |
> + SUN8I_A83T_THS_INTS_TDATA_IRQ_1 |
> + SUN8I_A83T_THS_INTS_TDATA_IRQ_2,

Do you reall need to clear all these interrupts if you're using only
one?

Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-01-29 10:49    [W:0.435 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site