lkml.org 
[lkml]   [2018]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [linux-sunxi] Re: [PATCH v2 14/16] arm: dts: sun8i: h3: enable H3 sid controller
On Mon, Jan 29, 2018 at 6:03 AM, Philipp Rossak <embed3d@gmail.com> wrote:
>
>
> On 29.01.2018 10:52, Maxime Ripard wrote:
>>
>> On Mon, Jan 29, 2018 at 12:29:17AM +0100, Philipp Rossak wrote:
>>>
>>> This patch enables the the sid controller in the H3. It can be used
>>> for thermal calibration data.
>>>
>>> Signed-off-by: Philipp Rossak <embed3d@gmail.com>
>>> ---
>>> arch/arm/boot/dts/sun8i-h3.dtsi | 7 +++++++
>>> 1 file changed, 7 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi
>>> b/arch/arm/boot/dts/sun8i-h3.dtsi
>>> index 3f83f6a27c74..9bb5cc29fec5 100644
>>> --- a/arch/arm/boot/dts/sun8i-h3.dtsi
>>> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
>>> @@ -72,6 +72,13 @@
>>> };
>>> };
>>> + soc {
>>> + sid: eeprom@1c14000 {
>>> + compatible = "allwinner,sun8i-h3-sid";
>>> + reg = <0x01c14000 0x400>;
>>> + };
>>> + };
>>> +
>>
>>
>> Shouldn't you also use a nvmem-cells property to the THS node?
>>
>> Maxime
>>
>
> Oh seems like I forgot that.
> As related to the wiki [1] this should be 64 bit wide at the address 0x34. I
> will add that in the next version.
>
>
> [1]: http://linux-sunxi.org/SID_Register_Guide#eFUSE
>
> Thanks,
> Philipp
>

Hi,

Any chance this will see a v3 soon? I'm kind of interested in sid node
for h3. =)

Thanks,

Kyle Evans

\
 
 \ /
  Last update: 2018-04-19 17:12    [W:0.108 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site