lkml.org 
[lkml]   [2018]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 13/16] arm: dts: sun8i: h3: add thermal zone to H3
    Date
    This patch adds the thermal zones to the H3. We have only one sensor and
    that is placed in the cpu.

    Signed-off-by: Philipp Rossak <embed3d@gmail.com>
    ---
    arch/arm/boot/dts/sun8i-h3.dtsi | 9 +++++++++
    1 file changed, 9 insertions(+)

    diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
    index fbb007e5798e..3f83f6a27c74 100644
    --- a/arch/arm/boot/dts/sun8i-h3.dtsi
    +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
    @@ -72,6 +72,15 @@
    };
    };

    + thermal-zones {
    + cpu-thermal {
    + /* milliseconds */
    + polling-delay-passive = <250>;
    + polling-delay = <1000>;
    + thermal-sensors = <&ths 0>;
    + };
    + };
    +
    timer {
    compatible = "arm,armv7-timer";
    interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
    --
    2.11.0
    \
     
     \ /
      Last update: 2018-01-29 00:31    [W:2.260 / U:0.108 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site