lkml.org 
[lkml]   [2015]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v2 3/3] usb: dwc3: gadget: return error if command sent to DEPCMD register fails
Date
Hi Felipe,

> -----Original Message-----
> From: Felipe Balbi [mailto:balbi@ti.com]
> Sent: Tuesday, June 30, 2015 3:17 AM
> To: Subbaraya Sundeep Bhatta
> Cc: balbi@ti.com; gregkh@linuxfoundation.org; linux-usb@vger.kernel.org;
> linux-kernel@vger.kernel.org; stable@vger.kernel.org; Subbaraya Sundeep
> Bhatta
> Subject: Re: [PATCH v2 3/3] usb: dwc3: gadget: return error if command
> sent to DEPCMD register fails
>
> Hi,
>
> On Thu, May 21, 2015 at 03:46:48PM +0530, Subbaraya Sundeep Bhatta
> wrote:
> > We need to return error to caller if command is not sent to controller
> > succesfully.
> >
> > Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com>
> > Fixes: 72246da40f37 (usb: Introduce DesignWare USB3 DRD Driver)
> > Cc: <stable@vger.kernel.org>
> > ---
> > v2 changes:
> > Added Fixes and Cc in commit message.
>
> I noticed that this breaks at least my AM437x silicon with DWC3 2.40a
> when used with g_zero and testusb. As of now, it could be that silicon is
> mis-behaving because I got a Transfer Complete before the failing Set
> Endpoint Transfer Resource command.
>
> In any case, can you run on your setup with g_zero and test.sh/testusb
> [1]/[2] just to verify that it really works for you ?

Ok I will do that.

Thanks,
Sundeep.B.S.

>
> Meanwhile, I'll continue testing on my end.
>
> cheers
>
> [1] https://gitorious.org/usb/usb-
> tools/source/47ef073d9b6c0eae816204c81374aafb795c6e40:testusb.c
> [2] https://gitorious.org/usb/usb-
> tools/source/47ef073d9b6c0eae816204c81374aafb795c6e40:test.sh
>
> --
> balbi


\
 
 \ /
  Last update: 2015-07-01 11:21    [W:0.225 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site