lkml.org 
[lkml]   [2015]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/3] usb: dwc3: gadget: return error if command sent to DEPCMD register fails
Hi again,

On Mon, Jun 29, 2015 at 04:47:01PM -0500, Felipe Balbi wrote:
> On Thu, May 21, 2015 at 03:46:48PM +0530, Subbaraya Sundeep Bhatta wrote:
> > We need to return error to caller if command is not sent to
> > controller succesfully.
> >
> > Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com>
> > Fixes: 72246da40f37 (usb: Introduce DesignWare USB3 DRD Driver)
> > Cc: <stable@vger.kernel.org>
> > ---
> > v2 changes:
> > Added Fixes and Cc in commit message.
>
> I noticed that this breaks at least my AM437x silicon with DWC3 2.40a
> when used with g_zero and testusb. As of now, it could be that silicon
> is mis-behaving because I got a Transfer Complete before the failing Set
> Endpoint Transfer Resource command.
>
> In any case, can you run on your setup with g_zero and test.sh/testusb
> [1]/[2] just to verify that it really works for you ?
>
> Meanwhile, I'll continue testing on my end.
>
> cheers
>
> [1] https://gitorious.org/usb/usb-tools/source/47ef073d9b6c0eae816204c81374aafb795c6e40:testusb.c
> [2] https://gitorious.org/usb/usb-tools/source/47ef073d9b6c0eae816204c81374aafb795c6e40:test.sh

Adding John here. John, any chance you could fire up dwc3 on HAPS and
see wether it works or fails for you ?

cheers

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2015-06-30 00:01    [W:0.994 / U:0.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site