lkml.org 
[lkml]   [2015]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] media: atmel-isi: setup the ISI_CFG2 register directly
Date
In the function configure_geometry(), we will setup the ISI CFG2
according to the sensor output format.

It make no sense to just read back the CFG2 register and just set part
of it.

So just set up this register directly makes things simpler.
Currently only support YUV format from camera sensor.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
---

drivers/media/platform/soc_camera/atmel-isi.c | 20 +++++++-------------
1 file changed, 7 insertions(+), 13 deletions(-)

diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c
index 9070172..8bc40ca 100644
--- a/drivers/media/platform/soc_camera/atmel-isi.c
+++ b/drivers/media/platform/soc_camera/atmel-isi.c
@@ -105,24 +105,25 @@ static u32 isi_readl(struct atmel_isi *isi, u32 reg)
static int configure_geometry(struct atmel_isi *isi, u32 width,
u32 height, u32 code)
{
- u32 cfg2, cr;
+ u32 cfg2;

+ /* According to sensor's output format to set cfg2 */
switch (code) {
/* YUV, including grey */
case MEDIA_BUS_FMT_Y8_1X8:
- cr = ISI_CFG2_GRAYSCALE;
+ cfg2 = ISI_CFG2_GRAYSCALE;
break;
case MEDIA_BUS_FMT_VYUY8_2X8:
- cr = ISI_CFG2_YCC_SWAP_MODE_3;
+ cfg2 = ISI_CFG2_YCC_SWAP_MODE_3;
break;
case MEDIA_BUS_FMT_UYVY8_2X8:
- cr = ISI_CFG2_YCC_SWAP_MODE_2;
+ cfg2 = ISI_CFG2_YCC_SWAP_MODE_2;
break;
case MEDIA_BUS_FMT_YVYU8_2X8:
- cr = ISI_CFG2_YCC_SWAP_MODE_1;
+ cfg2 = ISI_CFG2_YCC_SWAP_MODE_1;
break;
case MEDIA_BUS_FMT_YUYV8_2X8:
- cr = ISI_CFG2_YCC_SWAP_DEFAULT;
+ cfg2 = ISI_CFG2_YCC_SWAP_DEFAULT;
break;
/* RGB, TODO */
default:
@@ -130,17 +131,10 @@ static int configure_geometry(struct atmel_isi *isi, u32 width,
}

isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
-
- cfg2 = isi_readl(isi, ISI_CFG2);
- /* Set YCC swap mode */
- cfg2 &= ~ISI_CFG2_YCC_SWAP_MODE_MASK;
- cfg2 |= cr;
/* Set width */
- cfg2 &= ~(ISI_CFG2_IM_HSIZE_MASK);
cfg2 |= ((width - 1) << ISI_CFG2_IM_HSIZE_OFFSET) &
ISI_CFG2_IM_HSIZE_MASK;
/* Set height */
- cfg2 &= ~(ISI_CFG2_IM_VSIZE_MASK);
cfg2 |= ((height - 1) << ISI_CFG2_IM_VSIZE_OFFSET)
& ISI_CFG2_IM_VSIZE_MASK;
isi_writel(isi, ISI_CFG2, cfg2);
--
1.9.1


\
 
 \ /
  Last update: 2015-06-17 13:01    [W:0.092 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site