lkml.org 
[lkml]   [2015]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] media: atmel-isi: move configure_geometry() to start_streaming()
Date
As in set_fmt() function we only need to know which format is been set,
we don't need to access the ISI hardware in this moment.

So move the configure_geometry(), which access the ISI hardware, to
start_streaming() will make code more consistent and simpler.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
---

drivers/media/platform/soc_camera/atmel-isi.c | 17 +++++------------
1 file changed, 5 insertions(+), 12 deletions(-)

diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c
index 8bc40ca..b01086d 100644
--- a/drivers/media/platform/soc_camera/atmel-isi.c
+++ b/drivers/media/platform/soc_camera/atmel-isi.c
@@ -390,6 +390,11 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count)
/* Disable all interrupts */
isi_writel(isi, ISI_INTDIS, (u32)~0UL);

+ ret = configure_geometry(isi, icd->user_width, icd->user_height,
+ icd->current_fmt->code);
+ if (ret < 0)
+ return ret;
+
spin_lock_irq(&isi->lock);
/* Clear any pending interrupt */
isi_readl(isi, ISI_STATUS);
@@ -477,8 +482,6 @@ static int isi_camera_init_videobuf(struct vb2_queue *q,
static int isi_camera_set_fmt(struct soc_camera_device *icd,
struct v4l2_format *f)
{
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct atmel_isi *isi = ici->priv;
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
const struct soc_camera_format_xlate *xlate;
struct v4l2_pix_format *pix = &f->fmt.pix;
@@ -511,16 +514,6 @@ static int isi_camera_set_fmt(struct soc_camera_device *icd,
if (mf->code != xlate->code)
return -EINVAL;

- /* Enable PM and peripheral clock before operate isi registers */
- pm_runtime_get_sync(ici->v4l2_dev.dev);
-
- ret = configure_geometry(isi, pix->width, pix->height, xlate->code);
-
- pm_runtime_put(ici->v4l2_dev.dev);
-
- if (ret < 0)
- return ret;
-
pix->width = mf->width;
pix->height = mf->height;
pix->field = mf->field;
--
1.9.1


\
 
 \ /
  Last update: 2015-06-17 13:01    [W:0.101 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site