lkml.org 
[lkml]   [2014]   [May]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH V5 0/3] arm: dts: dra7: Updates for adding crossbar device
Date
Some socs have a large number of interrupts requests to service
the needs of its many peripherals and subsystems. All of the interrupt
requests lines from the subsystems are not needed at the same
time, so they have to be muxed to the controllers appropriately.
In such places a interrupt controllers are preceded by an
IRQ CROSSBAR that provides flexibility in muxing the device interrupt
requests to the controller inputs.

The dts file update to support the crossbar device and convert
peripheral irq numbers to crossbar number are added here.

This is a rebase of V4 series on top of 3.15-rc4

This series depends on crossbar-driver-fixes sent below
http://marc.info/?l=linux-omap&m=139929963420299&w=2

Sricharan R (3):
arm: dts: dra7: Add crossbar device binding
arm: dts: dra7: Replace peripheral interrupt numbers with crossbar
inputs
arm: dts: dra7: Add routable-irqs property for gic node

arch/arm/boot/dts/dra7.dtsi | 109 +++++++++++++++++++++++++------------------
1 file changed, 63 insertions(+), 46 deletions(-)

--
1.7.9.5



\
 
 \ /
  Last update: 2014-05-06 17:21    [W:0.099 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site