lkml.org 
[lkml]   [2014]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V5 0/3] arm: dts: dra7: Updates for adding crossbar device
On Wednesday 07 May 2014 03:15 AM, Darren Etheridge wrote:
> Sricharan R <r.sricharan@ti.com> wrote on Tue [2014-May-06 19:26:16 +0530]:
>> Some socs have a large number of interrupts requests to service
>> the needs of its many peripherals and subsystems. All of the interrupt
>> requests lines from the subsystems are not needed at the same
>> time, so they have to be muxed to the controllers appropriately.
>> In such places a interrupt controllers are preceded by an
>> IRQ CROSSBAR that provides flexibility in muxing the device interrupt
>> requests to the controller inputs.
>>
>> The dts file update to support the crossbar device and convert
>> peripheral irq numbers to crossbar number are added here.
>>
>> This is a rebase of V4 series on top of 3.15-rc4
>>
>> This series depends on crossbar-driver-fixes sent below
>> http://marc.info/?l=linux-omap&m=139929963420299&w=2
>>
>> Sricharan R (3):
>> arm: dts: dra7: Add crossbar device binding
>> arm: dts: dra7: Replace peripheral interrupt numbers with crossbar
>> inputs
>> arm: dts: dra7: Add routable-irqs property for gic node
>>
>
> OK, assuming the bisectability issues discussed earlier on this thread
> are addressed. I have tested the earlier crossbar patch series in
> conjunction with this dts series with VIP capture and DSS display
> running together on DRA7. Looks good with this combination of
> devices. VIP is one of the modules that must have a crossbar mapping as
> there is no default interrupt mapping for it, therefore VIP makes a good
> test case.
>
> So please feel free to add:
>
> Tested-by: Darren Etheridge <detheridge@ti.com>

Thanks for the testing. Will reorder and repost.

Regards,
Sricharan


\
 
 \ /
  Last update: 2014-05-07 07:21    [W:0.099 / U:0.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site