lkml.org 
[lkml]   [2014]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V5 0/3] arm: dts: dra7: Updates for adding crossbar device
On 05/06/2014 04:56 PM, Sricharan R wrote:
> Some socs have a large number of interrupts requests to service
> the needs of its many peripherals and subsystems. All of the interrupt
> requests lines from the subsystems are not needed at the same
> time, so they have to be muxed to the controllers appropriately.
> In such places a interrupt controllers are preceded by an
> IRQ CROSSBAR that provides flexibility in muxing the device interrupt
> requests to the controller inputs.
>
> The dts file update to support the crossbar device and convert
> peripheral irq numbers to crossbar number are added here.
>
> This is a rebase of V4 series on top of 3.15-rc4
>
> This series depends on crossbar-driver-fixes sent below
> http://marc.info/?l=linux-omap&m=139929963420299&w=2

For USB and SATA

Tested-by: Roger Quadros <rogerq@ti.com>

NOTE: I've updated the USB and SATA patches on l-o list to work with this series.

cheers,
-roger

>
> Sricharan R (3):
> arm: dts: dra7: Add crossbar device binding
> arm: dts: dra7: Replace peripheral interrupt numbers with crossbar
> inputs
> arm: dts: dra7: Add routable-irqs property for gic node
>
> arch/arm/boot/dts/dra7.dtsi | 109 +++++++++++++++++++++++++------------------
> 1 file changed, 63 insertions(+), 46 deletions(-)
>



\
 
 \ /
  Last update: 2014-05-07 14:21    [W:0.097 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site