lkml.org 
[lkml]   [2014]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/4] Add Qualcomm APQ8084 SoC support
Date
This patchset adds basic support for the Qualcomm Snapdragon 805 APQ8084 SoC.

The first two patches add device-tree files for the SoC and the board, the
third adds a board compatible string to the DT machine descriptor.
The last one adds information about the low-level debug UART base address
to the DEBUG_QCOM_UARTDM Kconfig help section introduced by [1].

Tested on APQ8084-MTP board.

Changes from v1:
- Remove the interrupts property from the l2-cache node as it is still not
accepted (suggested by Stephen Boyd)
- Move the timer node out of the soc container (suggested by Stephen Boyd)
- Add just "qcom,apq8084" in the board machine descriptors to cover other
future boards based on apq8084 (suggested by Kumar Gala)
- Change the last patch (debug UART) to just add info about the SoC PHYS/VIRT
addresses. Requires [1]. (suggestions by Arnd Bergmann and Ivan Ivanov)

[1] https://lkml.org/lkml/2014/4/14/312

Georgi Djakov (4):
ARM: dts: qcom: Add APQ8084 SoC support
ARM: dts: qcom: Add APQ8084-MTP board support
ARM: qcom: Add APQ8084 to mach-qcom
ARM: debug: qcom: add UART addresses to Kconfig help

arch/arm/Kconfig.debug | 1 +
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/qcom-apq8084-mtp.dts | 6 ++
arch/arm/boot/dts/qcom-apq8084.dtsi | 179 ++++++++++++++++++++++++++++++++
arch/arm/mach-qcom/board.c | 1 +
5 files changed, 189 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/qcom-apq8084-mtp.dts
create mode 100644 arch/arm/boot/dts/qcom-apq8084.dtsi

--
1.7.9.5



\
 
 \ /
  Last update: 2014-05-24 00:21    [W:0.119 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site