lkml.org 
[lkml]   [2014]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/4] ARM: debug: qcom: add UART addresses to Kconfig help
Date
Add information about the APQ8084 debug UART physical and virtual
addresses in the DEBUG_QCOM_UARTDM Kconfig help section.
Requires: https://lkml.org/lkml/2014/4/14/312

Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
---
arch/arm/Kconfig.debug | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 40ee328..e71723d 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -376,6 +376,7 @@ choice
their output to the serial port on Qualcomm devices.

ARCH DEBUG_UART_PHYS DEBUG_UART_BASE
+ APQ8084 0xf995e000 0xfa75e000
MSM8X60 0x19c40000 0xf0040000
MSM8960 0x16440000 0xf0040000
MSM8974 0xf991e000 0xfa71e000
--
1.7.9.5


\
 
 \ /
  Last update: 2014-05-23 18:41    [W:1.070 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site