lkml.org 
[lkml]   [2014]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 00/22] mpt2sas, mpt3sas: SAS2 Phase 19,20 and SAS3 Phase 4,5 patches
Date
Please consider this Patch set for next kernel release.

Highlights of this patch set:
- 96 MSIX vector support for SAS3 HBA's,
- Log Temperature threshold exceeds message for any temperature sensor,
- Updating the copy right information,
- Provide physical location of target drives by printing Enclosure level,
Enclosure address, Slot number etc,
- Displaying OEM's HBA branding String,
- MPI file's update,
- Some driver fixes.

Sreekanth Reddy (22):
[SCSI] mpt2sas: MPI2 Rev AA (2.00.19) specifications
[SCSI] mpt2sas, mpt3sas: Added support to log message when Temperature
Threshold exceeds for any Sensor
mpt2sas, mpt3sas: Fail the host reset initiated due to discovery
related I/O timeouts at driver load time
[SCSI] mpt2sas: Bump driver version to 19.100.00.00
[SCSI] mpt2sas: MPI2 Rev BB (2.00.20) specification and 2.00.35 header
files
[SCSI] mpt2sas, mpt3sas: Removing uppper boundary restriction for the
module parameter max_sgl_entries
[SCSI] mpt2sas: Complete the SCSI command with DID_RESET status for
log_info value 0x0x32010081
[SCSI] mpt2sas, mpt3sas: Update Attribution Language to Avago
[SCSI] mpt2sas, mpt3sas: Added a support to set cpu affinity for each
MSIX vector enabled by the HBA
[SCSI] mpt2sas: Bump driver version to 20.100.00.00
[SCSI] mpt3sas: Added Combined Reply Queue feature to extend up-to 96
MSIX vector support
mpt3sas: Get IOC_FACTS information using handshake protocol only after
HBA card gets into READY or Operational state.
[SCSI] mpt3sas: Added module parameter 'unblock_io' to unblock IO's
during disk addition
[SCSI] mpt2sas, mpt3sas: Remove redundancy code while freeing the
controller resources.
[SCSI] mpt3sas: MPI 2.5 Rev I (2.5.4) specifications.
[SCSI] mpt3sas: Provides the physical location of sas drives
[SCSI] mpt3sas: Bump mpt3sas Driver version to v5.100.00.00
[SCSI] mpt3sas: Update MPI2 strings to MPI2.5
[SCSI] mpt3sas: MPI 2.5 Rev J (2.5.5) specification and 2.00.34 header
files
[SCSI] mpt3sas: Add branding string support for OEM's HBA
mpt3sas: Add branding string support for OEM custom HBA
[SCSI] mpt3sas: Bump mpt3sas driver version to v6.100.00.00

drivers/scsi/mpt2sas/mpi/mpi2.h | 7 +-
drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h | 51 ++++-
drivers/scsi/mpt2sas/mpi/mpi2_ioc.h | 4 +-
drivers/scsi/mpt2sas/mpi/mpi2_tool.h | 6 +-
drivers/scsi/mpt2sas/mpt2sas_base.c | 79 +++++--
drivers/scsi/mpt2sas/mpt2sas_base.h | 15 +-
drivers/scsi/mpt2sas/mpt2sas_config.c | 39 +++-
drivers/scsi/mpt2sas/mpt2sas_ctl.c | 3 +-
drivers/scsi/mpt2sas/mpt2sas_ctl.h | 3 +-
drivers/scsi/mpt2sas/mpt2sas_debug.h | 3 +-
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 47 +++-
drivers/scsi/mpt2sas/mpt2sas_transport.c | 3 +-
drivers/scsi/mpt3sas/mpi/mpi2.h | 7 +-
drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 39 +++-
drivers/scsi/mpt3sas/mpi/mpi2_ioc.h | 4 +-
drivers/scsi/mpt3sas/mpi/mpi2_tool.h | 4 +-
drivers/scsi/mpt3sas/mpt3sas_base.c | 282 ++++++++++++++++++++---
drivers/scsi/mpt3sas/mpt3sas_base.h | 51 ++++-
drivers/scsi/mpt3sas/mpt3sas_config.c | 39 +++-
drivers/scsi/mpt3sas/mpt3sas_ctl.c | 3 +-
drivers/scsi/mpt3sas/mpt3sas_ctl.h | 3 +-
drivers/scsi/mpt3sas/mpt3sas_debug.h | 3 +-
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 343 ++++++++++++++++++++++++----
drivers/scsi/mpt3sas/mpt3sas_transport.c | 17 +-
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c | 3 +-
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h | 3 +-
26 files changed, 913 insertions(+), 148 deletions(-)

--
2.0.2



\
 
 \ /
  Last update: 2014-11-20 08:41    [W:0.230 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site