lkml.org 
[lkml]   [2014]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 03/22] [PATCH] mpt2sas, mpt3sas: Fail the host reset initiated due to discovery related I/O timeouts at driver load time
Date
When a flaky disk is there in a topology then during driver load,
discovery related I/O times out; which results in SCSI error recovery
initiating host reset and then the controller won't see any disk.

In this patch, The driver would return FAILED status to the host reset
initiated due to discovery related I/O timeout if ioc->is_driver_loading
is set. This flag would be set until we exit out of scsih_scan_finished().
i.e.
During device discovery if one of the disk is flaky
(which responds to some discovery commands and doesn't respond to some)
the driver wouldn't perform host reset for discovery related I/O timeout.
Instead it would return Failure for the host reset resulting in the
flaky disk getting removed by the SCSI Mid layer,
so other disks would be added correctly.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com>
---
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 9 +++++++++
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 8 ++++++++
2 files changed, 17 insertions(+)

diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index bca0cc9..38acb91 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -2760,9 +2760,18 @@ _scsih_host_reset(struct scsi_cmnd *scmd)
ioc->name, scmd);
scsi_print_command(scmd);

+ if (ioc->is_driver_loading) {
+ printk(MPT2SAS_INFO_FMT "Blocking the host reset\n",
+ ioc->name);
+ r = FAILED;
+ goto out;
+ }
+
retval = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
r = (retval < 0) ? FAILED : SUCCESS;
+
+ out:
printk(MPT2SAS_INFO_FMT "host reset: %s scmd(%p)\n",
ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);

diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 4d341a9..8c942c6 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -2415,9 +2415,17 @@ _scsih_host_reset(struct scsi_cmnd *scmd)
ioc->name, scmd);
scsi_print_command(scmd);

+ if (ioc->is_driver_loading) {
+ pr_info(MPT3SAS_FMT "Blocking the host reset\n",
+ ioc->name);
+ r = FAILED;
+ goto out;
+ }
+
retval = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
r = (retval < 0) ? FAILED : SUCCESS;
+out:
pr_info(MPT3SAS_FMT "host reset: %s scmd(%p)\n",
ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);

--
2.0.2


\
 
 \ /
  Last update: 2014-11-20 08:41    [W:0.672 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site