lkml.org 
[lkml]   [2013]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/9] ARM: at91/dt: add missing devices to rm9200ek board
Date
Hello,

This patch series adds support for the remaining devices (or device options)
not yet supported in dt.

AFAICT there is no more infos/devices not converted to dt for this board,
and we should be able to remove board-at91rm9200ek.c (when we decide to
do it).

This series was not tested (the dt compilation passed), could someone
owning this board test it ?

In order to test it, you need to apply these series first:
https://lkml.org/lkml/2013/8/27/58
pinctrl: at91: add support for OUTPUT config

Best Regards,

Boris

Boris BREZILLON (9):
ARM: at91/dt: rm9200: add spi0 chip select pins definitions
ARM: at91/dt: add ethernet phy to at91rm9200ek board
ARM: at91/dt: add usb1 vbus and pullup pins
ARM: at91/dt: add atmel,pullup-gpio to at91rm9200ek usb1 definition
ARM: at91/dt: add mmc0 slot0 support to at91rm9200ek board
ARM: at91/dt: add spi0 support to at91rm9200ek board
ARM: at91/dt: add i2c devices connected to at91rm9200ek board
ARM: at91/dt: add new at91rm9200ek_mmc board
ARM: at91/dt: add new at91rm9200ek_dataflash board

arch/arm/boot/dts/at91rm9200.dtsi | 20 ++++++
arch/arm/boot/dts/at91rm9200ek.dts | 88 ++++++++++++++++++++++++++
arch/arm/boot/dts/at91rm9200ek_dataflash.dts | 33 ++++++++++
arch/arm/boot/dts/at91rm9200ek_mmc.dts | 23 +++++++
4 files changed, 164 insertions(+)
create mode 100644 arch/arm/boot/dts/at91rm9200ek_dataflash.dts
create mode 100644 arch/arm/boot/dts/at91rm9200ek_mmc.dts

--
1.7.9.5



\
 
 \ /
  Last update: 2013-08-28 14:01    [W:0.214 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site