lkml.org 
[lkml]   [2013]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.11 221/272] usb: musb: call musb_start() only once in OTG mode
Date
3.11.10.1 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

commit ae44df2e21b50f9fff28ac75c57e399c04df812c upstream.

In commit 001dd84 ("usb: musb: start musb on the udc side, too") it was
ensured that the state engine is started also in OTG mode after a
removal / insertion of the gadget.
Unfortunately this change also introduced a bug: If the device is
configured as OTG and it connected with a remote host _without_ loading
a gadget then we bug() later (because musb->otg->gadget is not
initialized).
Initially I assumed it might be nice to have the host part of musb in
OTG mode working without having a gadget loaded. This bug and fact that
it wasn't working like this before the host/gadget split made me realize
that this was a silly idea.
This patch now introduces back the old behavior where in OTG mode the
host mode is only working after the gadget has been loaded.

Cc: Daniel Mack <zonque@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
drivers/usb/musb/musb_virthub.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index d1d6b83..9af6bba 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -220,6 +220,23 @@ int musb_hub_status_data(struct usb_hcd *hcd, char *buf)
return retval;
}

+static int musb_has_gadget(struct musb *musb)
+{
+ /*
+ * In host-only mode we start a connection right away. In OTG mode
+ * we have to wait until we loaded a gadget. We don't really need a
+ * gadget if we operate as a host but we should not start a session
+ * as a device without a gadget or else we explode.
+ */
+#ifdef CONFIG_USB_MUSB_HOST
+ return 1;
+#else
+ if (musb->port_mode == MUSB_PORT_MODE_HOST)
+ return 1;
+ return musb->g.dev.driver != NULL;
+#endif
+}
+
int musb_hub_control(
struct usb_hcd *hcd,
u16 typeReq,
@@ -362,7 +379,7 @@ int musb_hub_control(
* initialization logic, e.g. for OTG, or change any
* logic relating to VBUS power-up.
*/
- if (!hcd->self.is_b_host)
+ if (!hcd->self.is_b_host && musb_has_gadget(musb))
musb_start(musb);
break;
case USB_PORT_FEAT_RESET:
--
1.8.3.2


\
 
 \ /
  Last update: 2013-12-06 15:21    [W:1.446 / U:2.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site