lkml.org 
[lkml]   [2013]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.11 203/272] ath5k: fix regression in tx status processing
Date
3.11.10.1 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <nbd@openwrt.org>

commit 7ede612fd615abcda0cc30e5bef2a70f4cf4f75c upstream.

The regression was introduced in the following commit:

0967e01e8e713ed2982fb4eba8ba13794e9a6e89
"ath5k: make use of the new rate control API"

ath5k_tx_frame_completed saves the intended per-rate retry counts before
they are cleared by ieee80211_tx_info_clear_status, however at this
point the information in info->status.rates is incomplete.

This causes significant throughput degradation and excessive packet loss
on links where high bit rates don't work properly.

Move the copy from bf->rates a few lines up to ensure that the saved
retry counts are updated, and that they are really cleared in
info->status.rates after the call to ieee80211_tx_info_clear_status.

Cc: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Cc: Benjamin Vahl <bvahl@net.t-labs.tu-berlin.de>
Reported-by: Ben West <ben@gowasabi.net>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Acked-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
drivers/net/wireless/ath/ath5k/base.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index ce67ab7..644f40a 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1628,15 +1628,15 @@ ath5k_tx_frame_completed(struct ath5k_hw *ah, struct sk_buff *skb,
ah->stats.tx_bytes_count += skb->len;
info = IEEE80211_SKB_CB(skb);

+ size = min_t(int, sizeof(info->status.rates), sizeof(bf->rates));
+ memcpy(info->status.rates, bf->rates, size);
+
tries[0] = info->status.rates[0].count;
tries[1] = info->status.rates[1].count;
tries[2] = info->status.rates[2].count;

ieee80211_tx_info_clear_status(info);

- size = min_t(int, sizeof(info->status.rates), sizeof(bf->rates));
- memcpy(info->status.rates, bf->rates, size);
-
for (i = 0; i < ts->ts_final_idx; i++) {
struct ieee80211_tx_rate *r =
&info->status.rates[i];
--
1.8.3.2


\
 
 \ /
  Last update: 2013-12-06 14:41    [W:0.524 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site