lkml.org 
[lkml]   [2013]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 0/4] Adding usb2.0 host-phy support for exynos5250
HI,

On Mon, Jan 21, 2013 at 09:23:28PM -0800, Kukjin Kim wrote:
> Vivek Gautam wrote:
> >
> > Changes from v5:
> > - Rebased on top of latest patches:
> > usb: phy: samsung: Introducing usb phy driver for hsotg (v9)
> > usb: phy: samsung: Add support to set pmu isolation (v6)
> > As a result adding hostphy enable mask and hostphy register offsets
> > to driver data in order to access the HOSTPHY CONTROL register.
> >
> > - Adding member 'otg' to struct samsung-usbphy so that its consumers
> > can call otg->set_host so as to make 'phy' aware of the consumer type:
> > HOST/DEVICE
> >
> > - Adding 'otg' to 'struct s5p_ehci_hcd' and 'struct exynos_ohci_hcd'
> > which keeps track of 'otg' of the controllers' phy. This then sets
> > the host.
> >
> > - Moved samsung_usbphy_set_type() calls from ehci-s5p and ohci-exynos
> > to phy driver itself where based on phy_type it is called.
> >
> > - Added separate macro definition for USB20PHY_CFG register to select
> > between host/device type usb link.
> >
> > - Removing unnecessary argument 'phy_type' from
> > samsung_usbphy_set_type()
> > and samsung_usbphy_cfg_sel().
> >
> > - Addressed few nits:
> > -- added macro for 'KHZ'
> > -- removing useless 'if' from samsung_usbphy_cfg_sel()
> > -- keeping the place of clk_get intact and requesting driver
> > data before that.
> >
> > Vivek Gautam (4):
> > ARM: EXYNOS: Update & move usb-phy types to generic include layer
> > usb: phy: samsung: Add host phy support to samsung-phy driver
> > USB: ehci-s5p: Add phy driver support
> > USB: ohci-exynos: Add phy driver support
> >
> > .../devicetree/bindings/usb/samsung-usbphy.txt | 12 +-
> > drivers/usb/host/ehci-s5p.c | 81 +++-
> > drivers/usb/host/ohci-exynos.c | 85 +++-
> > drivers/usb/phy/Kconfig | 2 +-
> > drivers/usb/phy/samsung-usbphy.c | 512
> ++++++++++++++++++--
> > include/linux/usb/samsung_usb_phy.h | 16 +
> > 6 files changed, 635 insertions(+), 73 deletions(-)
> > create mode 100644 include/linux/usb/samsung_usb_phy.h
> >
> > --
> > 1.7.6.5
>
> Looks good to me,
>
> Felipe and Greg, I don't know who should take this series anyway, feel free
> to add my ack:
>
> Acked-by: Kukjin Kim <kgene.kim@samsung.com>

I will take care of it. But I need Alan's Acked-by for EHCI and OHCI
parts.

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2013-01-22 10:21    [W:0.124 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site