lkml.org 
[lkml]   [2013]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 0/4] Adding usb2.0 host-phy support for exynos5250
On Tue, Jan 22, 2013 at 02:45:26PM +0530, Vivek Gautam wrote:
> Hi Felipe,
>
>
> On Tue, Jan 22, 2013 at 2:20 PM, Felipe Balbi <balbi@ti.com> wrote:
> > HI,
> >
> > On Mon, Jan 21, 2013 at 09:23:28PM -0800, Kukjin Kim wrote:
> >> Vivek Gautam wrote:
> >> >
> >> > Changes from v5:
> >> > - Rebased on top of latest patches:
> >> > usb: phy: samsung: Introducing usb phy driver for hsotg (v9)
> >> > usb: phy: samsung: Add support to set pmu isolation (v6)
> >> > As a result adding hostphy enable mask and hostphy register offsets
> >> > to driver data in order to access the HOSTPHY CONTROL register.
> >> >
> >> > - Adding member 'otg' to struct samsung-usbphy so that its consumers
> >> > can call otg->set_host so as to make 'phy' aware of the consumer type:
> >> > HOST/DEVICE
> >> >
> >> > - Adding 'otg' to 'struct s5p_ehci_hcd' and 'struct exynos_ohci_hcd'
> >> > which keeps track of 'otg' of the controllers' phy. This then sets
> >> > the host.
> >> >
> >> > - Moved samsung_usbphy_set_type() calls from ehci-s5p and ohci-exynos
> >> > to phy driver itself where based on phy_type it is called.
> >> >
> >> > - Added separate macro definition for USB20PHY_CFG register to select
> >> > between host/device type usb link.
> >> >
> >> > - Removing unnecessary argument 'phy_type' from
> >> > samsung_usbphy_set_type()
> >> > and samsung_usbphy_cfg_sel().
> >> >
> >> > - Addressed few nits:
> >> > -- added macro for 'KHZ'
> >> > -- removing useless 'if' from samsung_usbphy_cfg_sel()
> >> > -- keeping the place of clk_get intact and requesting driver
> >> > data before that.
> >> >
> >> > Vivek Gautam (4):
> >> > ARM: EXYNOS: Update & move usb-phy types to generic include layer
> >> > usb: phy: samsung: Add host phy support to samsung-phy driver
> >> > USB: ehci-s5p: Add phy driver support
> >> > USB: ohci-exynos: Add phy driver support
> >> >
> >> > .../devicetree/bindings/usb/samsung-usbphy.txt | 12 +-
> >> > drivers/usb/host/ehci-s5p.c | 81 +++-
> >> > drivers/usb/host/ohci-exynos.c | 85 +++-
> >> > drivers/usb/phy/Kconfig | 2 +-
> >> > drivers/usb/phy/samsung-usbphy.c | 512
> >> ++++++++++++++++++--
> >> > include/linux/usb/samsung_usb_phy.h | 16 +
> >> > 6 files changed, 635 insertions(+), 73 deletions(-)
> >> > create mode 100644 include/linux/usb/samsung_usb_phy.h
> >> >
> >> > --
> >> > 1.7.6.5
> >>
> >> Looks good to me,
> >>
> >> Felipe and Greg, I don't know who should take this series anyway, feel free
> >> to add my ack:
> >>
> >> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
> >
> > I will take care of it. But I need Alan's Acked-by for EHCI and OHCI
> > parts.
> >
>
> We got Alan's ACK for:
> USB: ehci-s5p: Add phy driver support
> USB: ohci-exynos: Add phy driver support

Ok, then as soon as I get back to the office (in a few hours), I'll
start queueing those.

cheers

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2013-01-22 11:02    [W:0.074 / U:0.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site