lkml.org 
[lkml]   [2013]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v6 0/4] Adding usb2.0 host-phy support for exynos5250
From
Hi Felipe,


On Tue, Jan 22, 2013 at 3:02 PM, Felipe Balbi <balbi@ti.com> wrote:
> HI,
>
> On Tue, Jan 22, 2013 at 11:29:47AM +0200, Felipe Balbi wrote:
>> On Tue, Jan 22, 2013 at 02:45:26PM +0530, Vivek Gautam wrote:
>> > Hi Felipe,
>> >
>> >
>> > On Tue, Jan 22, 2013 at 2:20 PM, Felipe Balbi <balbi@ti.com> wrote:
>> > > HI,
>> > >
>> > > On Mon, Jan 21, 2013 at 09:23:28PM -0800, Kukjin Kim wrote:
>> > >> Vivek Gautam wrote:
>> > >> >
>> > >> > Changes from v5:
>> > >> > - Rebased on top of latest patches:
>> > >> > usb: phy: samsung: Introducing usb phy driver for hsotg (v9)
>> > >> > usb: phy: samsung: Add support to set pmu isolation (v6)
>> > >> > As a result adding hostphy enable mask and hostphy register offsets
>> > >> > to driver data in order to access the HOSTPHY CONTROL register.
>> > >> >
>> > >> > - Adding member 'otg' to struct samsung-usbphy so that its consumers
>> > >> > can call otg->set_host so as to make 'phy' aware of the consumer type:
>> > >> > HOST/DEVICE
>> > >> >
>> > >> > - Adding 'otg' to 'struct s5p_ehci_hcd' and 'struct exynos_ohci_hcd'
>> > >> > which keeps track of 'otg' of the controllers' phy. This then sets
>> > >> > the host.
>> > >> >
>> > >> > - Moved samsung_usbphy_set_type() calls from ehci-s5p and ohci-exynos
>> > >> > to phy driver itself where based on phy_type it is called.
>> > >> >
>> > >> > - Added separate macro definition for USB20PHY_CFG register to select
>> > >> > between host/device type usb link.
>> > >> >
>> > >> > - Removing unnecessary argument 'phy_type' from
>> > >> > samsung_usbphy_set_type()
>> > >> > and samsung_usbphy_cfg_sel().
>> > >> >
>> > >> > - Addressed few nits:
>> > >> > -- added macro for 'KHZ'
>> > >> > -- removing useless 'if' from samsung_usbphy_cfg_sel()
>> > >> > -- keeping the place of clk_get intact and requesting driver
>> > >> > data before that.
>> > >> >
>> > >> > Vivek Gautam (4):
>> > >> > ARM: EXYNOS: Update & move usb-phy types to generic include layer
>> > >> > usb: phy: samsung: Add host phy support to samsung-phy driver
>> > >> > USB: ehci-s5p: Add phy driver support
>> > >> > USB: ohci-exynos: Add phy driver support
>> > >> >
>> > >> > .../devicetree/bindings/usb/samsung-usbphy.txt | 12 +-
>> > >> > drivers/usb/host/ehci-s5p.c | 81 +++-
>> > >> > drivers/usb/host/ohci-exynos.c | 85 +++-
>> > >> > drivers/usb/phy/Kconfig | 2 +-
>> > >> > drivers/usb/phy/samsung-usbphy.c | 512
>> > >> ++++++++++++++++++--
>> > >> > include/linux/usb/samsung_usb_phy.h | 16 +
>> > >> > 6 files changed, 635 insertions(+), 73 deletions(-)
>> > >> > create mode 100644 include/linux/usb/samsung_usb_phy.h
>> > >> >
>> > >> > --
>> > >> > 1.7.6.5
>> > >>
>> > >> Looks good to me,
>> > >>
>> > >> Felipe and Greg, I don't know who should take this series anyway, feel free
>> > >> to add my ack:
>> > >>
>> > >> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
>> > >
>> > > I will take care of it. But I need Alan's Acked-by for EHCI and OHCI
>> > > parts.
>> > >
>> >
>> > We got Alan's ACK for:
>> > USB: ehci-s5p: Add phy driver support
>> > USB: ohci-exynos: Add phy driver support
>>
>> Ok, then as soon as I get back to the office (in a few hours), I'll
>> start queueing those.
>
> Actually, if you want to make my life a little easier today, you could
> resend the series with all Acks in place ;-)
>

Sure, will resend the patches with proper Acks and version :-)

> ps: hehe, I'm about to go a little nuts today, too many things happening
> at once ;-)
>
:-)


--
Thanks & Regards
Vivek


\
 
 \ /
  Last update: 2013-01-22 11:03    [W:0.054 / U:2.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site