lkml.org 
[lkml]   [2013]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v6 0/4] Adding usb2.0 host-phy support for exynos5250
From
Hi Felipe,


On Tue, Jan 22, 2013 at 2:20 PM, Felipe Balbi <balbi@ti.com> wrote:
> HI,
>
> On Mon, Jan 21, 2013 at 09:23:28PM -0800, Kukjin Kim wrote:
>> Vivek Gautam wrote:
>> >
>> > Changes from v5:
>> > - Rebased on top of latest patches:
>> > usb: phy: samsung: Introducing usb phy driver for hsotg (v9)
>> > usb: phy: samsung: Add support to set pmu isolation (v6)
>> > As a result adding hostphy enable mask and hostphy register offsets
>> > to driver data in order to access the HOSTPHY CONTROL register.
>> >
>> > - Adding member 'otg' to struct samsung-usbphy so that its consumers
>> > can call otg->set_host so as to make 'phy' aware of the consumer type:
>> > HOST/DEVICE
>> >
>> > - Adding 'otg' to 'struct s5p_ehci_hcd' and 'struct exynos_ohci_hcd'
>> > which keeps track of 'otg' of the controllers' phy. This then sets
>> > the host.
>> >
>> > - Moved samsung_usbphy_set_type() calls from ehci-s5p and ohci-exynos
>> > to phy driver itself where based on phy_type it is called.
>> >
>> > - Added separate macro definition for USB20PHY_CFG register to select
>> > between host/device type usb link.
>> >
>> > - Removing unnecessary argument 'phy_type' from
>> > samsung_usbphy_set_type()
>> > and samsung_usbphy_cfg_sel().
>> >
>> > - Addressed few nits:
>> > -- added macro for 'KHZ'
>> > -- removing useless 'if' from samsung_usbphy_cfg_sel()
>> > -- keeping the place of clk_get intact and requesting driver
>> > data before that.
>> >
>> > Vivek Gautam (4):
>> > ARM: EXYNOS: Update & move usb-phy types to generic include layer
>> > usb: phy: samsung: Add host phy support to samsung-phy driver
>> > USB: ehci-s5p: Add phy driver support
>> > USB: ohci-exynos: Add phy driver support
>> >
>> > .../devicetree/bindings/usb/samsung-usbphy.txt | 12 +-
>> > drivers/usb/host/ehci-s5p.c | 81 +++-
>> > drivers/usb/host/ohci-exynos.c | 85 +++-
>> > drivers/usb/phy/Kconfig | 2 +-
>> > drivers/usb/phy/samsung-usbphy.c | 512
>> ++++++++++++++++++--
>> > include/linux/usb/samsung_usb_phy.h | 16 +
>> > 6 files changed, 635 insertions(+), 73 deletions(-)
>> > create mode 100644 include/linux/usb/samsung_usb_phy.h
>> >
>> > --
>> > 1.7.6.5
>>
>> Looks good to me,
>>
>> Felipe and Greg, I don't know who should take this series anyway, feel free
>> to add my ack:
>>
>> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
>
> I will take care of it. But I need Alan's Acked-by for EHCI and OHCI
> parts.
>

We got Alan's ACK for:
USB: ehci-s5p: Add phy driver support
USB: ohci-exynos: Add phy driver support



--
Thanks & Regards
Vivek


\
 
 \ /
  Last update: 2013-01-22 11:44    [W:0.062 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site