lkml.org 
[lkml]   [2024]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 13/18] i2c: rk3x: remove printout on handled timeouts
Date
Am Mittwoch, 10. April 2024, 13:24:27 CEST schrieb Wolfram Sang:
> I2C and SMBus timeouts are not something the user needs to be informed
> about on controller level. The client driver may know if that really is
> a problem and give more detailed information to the user. The controller
> should just pass this information upwards. Remove the printout.
>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Acked-by: Heiko Stuebner <heiko@sntech.de>


> ---
> drivers/i2c/busses/i2c-rk3x.c | 3 ---
> 1 file changed, 3 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
> index 086fdf262e7b..8c7367f289d3 100644
> --- a/drivers/i2c/busses/i2c-rk3x.c
> +++ b/drivers/i2c/busses/i2c-rk3x.c
> @@ -1106,9 +1106,6 @@ static int rk3x_i2c_xfer_common(struct i2c_adapter *adap,
> spin_lock_irqsave(&i2c->lock, flags);
>
> if (timeout == 0) {
> - dev_err(i2c->dev, "timeout, ipd: 0x%02x, state: %d\n",
> - i2c_readl(i2c, REG_IPD), i2c->state);
> -
> /* Force a STOP condition without interrupt */
> i2c_writel(i2c, 0, REG_IEN);
> val = i2c_readl(i2c, REG_CON) & REG_CON_TUNING_MASK;
>





\
 
 \ /
  Last update: 2024-04-11 21:16    [W:0.178 / U:3.980 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site