lkml.org 
[lkml]   [2024]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 13/18] i2c: rk3x: remove printout on handled timeouts
Date
I2C and SMBus timeouts are not something the user needs to be informed
about on controller level. The client driver may know if that really is
a problem and give more detailed information to the user. The controller
should just pass this information upwards. Remove the printout.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
drivers/i2c/busses/i2c-rk3x.c | 3 ---
1 file changed, 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 086fdf262e7b..8c7367f289d3 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -1106,9 +1106,6 @@ static int rk3x_i2c_xfer_common(struct i2c_adapter *adap,
spin_lock_irqsave(&i2c->lock, flags);

if (timeout == 0) {
- dev_err(i2c->dev, "timeout, ipd: 0x%02x, state: %d\n",
- i2c_readl(i2c, REG_IPD), i2c->state);
-
/* Force a STOP condition without interrupt */
i2c_writel(i2c, 0, REG_IEN);
val = i2c_readl(i2c, REG_CON) & REG_CON_TUNING_MASK;
--
2.43.0

\
 
 \ /
  Last update: 2024-04-10 13:28    [W:0.251 / U:1.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site