lkml.org 
[lkml]   [2024]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 11/18] i2c: qcom-geni: remove printout on handled timeouts
Date
I2C and SMBus timeouts are not something the user needs to be informed
about on controller level. The client driver may know if that really is
a problem and give more detailed information to the user. The controller
should just pass this information upwards. Remove the printout.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
drivers/i2c/busses/i2c-qcom-geni.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 11dcfcf13d8b..6054c62cd2ff 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -642,11 +642,8 @@ static int geni_i2c_gpi_xfer(struct geni_i2c_dev *gi2c, struct i2c_msg msgs[], i
dma_async_issue_pending(gi2c->tx_c);

timeout = wait_for_completion_timeout(&gi2c->done, XFER_TIMEOUT);
- if (!timeout) {
- dev_err(gi2c->se.dev, "I2C timeout gpi flags:%d addr:0x%x\n",
- gi2c->cur->flags, gi2c->cur->addr);
+ if (!timeout)
gi2c->err = -ETIMEDOUT;
- }

if (gi2c->err) {
ret = gi2c->err;
--
2.43.0

\
 
 \ /
  Last update: 2024-04-10 13:27    [W:0.295 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site