lkml.org 
[lkml]   [2024]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v2 09/21] arm64: dts: qcom: sc8280xp: Add PCIe bridge node
On Qcom SoCs, the PCIe host bridge is connected to a single PCIe bridge
for each controller instance. Hence, add a node to represent the bridge.

While at it, let's remove the bridge properties from board dts as they are
now redundant.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
.../dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 20 +++------
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 50 ++++++++++++++++++++++
2 files changed, 56 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 15ae94c1602d..caf7dff446a6 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -731,22 +731,14 @@ &pcie4 {
pinctrl-0 = <&pcie4_default>;

status = "okay";
+};

- pcie@0 {
- device_type = "pci";
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- bus-range = <0x01 0xff>;
-
- wifi@0 {
- compatible = "pci17cb,1103";
- reg = <0x10000 0x0 0x0 0x0 0x0>;
+&pcie4_port0 {
+ wifi@0 {
+ compatible = "pci17cb,1103";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;

- qcom,ath11k-calibration-variant = "LE_X13S";
- };
+ qcom,ath11k-calibration-variant = "LE_X13S";
};
};

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index a5b194813079..c7feebcb28b9 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -1779,6 +1779,16 @@ pcie4: pcie@1c00000 {
phy-names = "pciephy";

status = "disabled";
+
+ pcie4_port0: pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};

pcie4_phy: phy@1c06000 {
@@ -1877,6 +1887,16 @@ pcie3b: pcie@1c08000 {
phy-names = "pciephy";

status = "disabled";
+
+ pcie3b_port0: pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};

pcie3b_phy: phy@1c0e000 {
@@ -1975,6 +1995,16 @@ pcie3a: pcie@1c10000 {
phy-names = "pciephy";

status = "disabled";
+
+ pcie3a_port0: pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};

pcie3a_phy: phy@1c14000 {
@@ -2076,6 +2106,16 @@ pcie2b: pcie@1c18000 {
phy-names = "pciephy";

status = "disabled";
+
+ pcie2b_port0: pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};

pcie2b_phy: phy@1c1e000 {
@@ -2174,6 +2214,16 @@ pcie2a: pcie@1c20000 {
phy-names = "pciephy";

status = "disabled";
+
+ pcie2a_port0: pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};

pcie2a_phy: phy@1c24000 {
--
2.25.1


\
 
 \ /
  Last update: 2024-05-27 15:58    [W:0.141 / U:1.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site