lkml.org 
[lkml]   [2024]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v2 10/18] clk: qcom: gcc-sm8350: Set delay for Venus CLK resets
Some Venus resets may require more time when toggling. Describe that.

The value is known for SM8350, see [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/commit/dfe241edf23daf3c1ccbb79b02798965123fad98
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
drivers/clk/qcom/gcc-sm8350.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/gcc-sm8350.c b/drivers/clk/qcom/gcc-sm8350.c
index 1385a98eb3bb..df4842588a24 100644
--- a/drivers/clk/qcom/gcc-sm8350.c
+++ b/drivers/clk/qcom/gcc-sm8350.c
@@ -3743,8 +3743,8 @@ static const struct qcom_reset_map gcc_sm8350_resets[] = {
[GCC_USB3PHY_PHY_PRIM_BCR] = { 0x50004 },
[GCC_USB3PHY_PHY_SEC_BCR] = { 0x50010 },
[GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x6a000 },
- [GCC_VIDEO_AXI0_CLK_ARES] = { 0x28010, 2 },
- [GCC_VIDEO_AXI1_CLK_ARES] = { 0x28018, 2 },
+ [GCC_VIDEO_AXI0_CLK_ARES] = { .reg = 0x28010, .bit = 2, .udelay = 400 },
+ [GCC_VIDEO_AXI1_CLK_ARES] = { .reg = 0x28018, .bit = 2, .udelay = 400 },
[GCC_VIDEO_BCR] = { 0x28000 },
};

--
2.43.0


\
 
 \ /
  Last update: 2024-05-27 14:51    [W:0.123 / U:0.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site