lkml.org 
[lkml]   [2024]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt-bindings: usb: Add binding for TI USB8020B hub controller
Date
The TI USB8020B is a USB 3.0 hub controller with 2 ports.

This initial version of the binding only describes USB related aspects
of the USB8020B, it does not cover the option of connecting the controller
as an i2c slave.

Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
---
.../devicetree/bindings/usb/ti,usb8020b.yaml | 69 +++++++++++++++++++
1 file changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/ti,usb8020b.yaml

diff --git a/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml b/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml
new file mode 100644
index 000000000000..8ef117793e11
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,usb8020b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI USB8020B USB 3.0 hub controller
+
+maintainers:
+ - Macpaul Lin <macpaul.lin@mediatek.com>
+
+allOf:
+ - $ref: usb-device.yaml#
+
+properties:
+ compatible:
+ enum:
+ - usb451,8025
+ - usb451,8027
+
+ reg: true
+
+ reset-gpios:
+ items:
+ - description: GPIO specifier for GRST# pin.
+
+ vdd-supply:
+ description:
+ VDD power supply to the hub
+
+ peer-hub:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to the peer hub on the controller.
+
+required:
+ - compatible
+ - reg
+ - peer-hub
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ usb {
+ dr_mode = "host";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub_2_0: hub@1 {
+ compatible = "usb451,8027";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+ vdd-supply = <&usb_hub_fixed_3v3>;
+ };
+
+ /* 3.0 hub on port 2 */
+ hub_3_0: hub@2 {
+ compatible = "usb451,8025";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+ vdd-supply = <&usb_hub_fixed_3v3>;
+ };
+ };
--
2.18.0

\
 
 \ /
  Last update: 2024-05-27 15:24    [W:0.082 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site