lkml.org 
[lkml]   [2023]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v7 2/9] clk: meson: g12a: add CTS_ENCL & CTS_ENCL_SEL clocks
Date

On Thu 03 Aug 2023 at 14:03, Neil Armstrong <neil.armstrong@linaro.org> wrote:

> Add new CTS_ENCL & CTS_ENCL_SEL clocks for the G12A compatible
> SoCs, they are used to feed the VPU LCD Pixel encoder used for
> DSI display purposes.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
> drivers/clk/meson/g12a.c | 40 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 40 insertions(+)
>
> diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
> index ceabd5f4b2ac..5d62134335c1 100644
> --- a/drivers/clk/meson/g12a.c
> +++ b/drivers/clk/meson/g12a.c
> @@ -3549,6 +3549,22 @@ static struct clk_regmap g12a_cts_encp_sel = {
> },
> };
>
> +static struct clk_regmap g12a_cts_encl_sel = {
> + .data = &(struct clk_regmap_mux_data){
> + .offset = HHI_VIID_CLK_DIV,
> + .mask = 0xf,
> + .shift = 12,
> + .table = mux_table_cts_sel,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "cts_encl_sel",
> + .ops = &clk_regmap_mux_ops,
> + .parent_hws = g12a_cts_parent_hws,
> + .num_parents = ARRAY_SIZE(g12a_cts_parent_hws),
> + .flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,

Why nocache ?
This is usually used when the consumer driver is poking around behind
CCF back.

Any chance this can use assigned-parent or CCF directly ?

> + },
> +};
> +
> static struct clk_regmap g12a_cts_vdac_sel = {
> .data = &(struct clk_regmap_mux_data){
> .offset = HHI_VIID_CLK_DIV,
> @@ -3628,6 +3644,22 @@ static struct clk_regmap g12a_cts_encp = {
> },
> };
>
> +static struct clk_regmap g12a_cts_encl = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = HHI_VID_CLK_CNTL2,
> + .bit_idx = 3,
> + },
> + .hw.init = &(struct clk_init_data) {
> + .name = "cts_encl",
> + .ops = &clk_regmap_gate_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &g12a_cts_encl_sel.hw
> + },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,

What is the reason for IGNORE_UNUSED ?
If you need to keep the clock on while the driver comes up, please
document it here.

> + },
> +};
> +
> static struct clk_regmap g12a_cts_vdac = {
> .data = &(struct clk_regmap_gate_data){
> .offset = HHI_VID_CLK_CNTL2,
> @@ -4407,10 +4439,12 @@ static struct clk_hw *g12a_hw_clks[] = {
> [CLKID_VCLK2_DIV12] = &g12a_vclk2_div12.hw,
> [CLKID_CTS_ENCI_SEL] = &g12a_cts_enci_sel.hw,
> [CLKID_CTS_ENCP_SEL] = &g12a_cts_encp_sel.hw,
> + [CLKID_CTS_ENCL_SEL] = &g12a_cts_encl_sel.hw,
> [CLKID_CTS_VDAC_SEL] = &g12a_cts_vdac_sel.hw,
> [CLKID_HDMI_TX_SEL] = &g12a_hdmi_tx_sel.hw,
> [CLKID_CTS_ENCI] = &g12a_cts_enci.hw,
> [CLKID_CTS_ENCP] = &g12a_cts_encp.hw,
> + [CLKID_CTS_ENCL] = &g12a_cts_encl.hw,
> [CLKID_CTS_VDAC] = &g12a_cts_vdac.hw,
> [CLKID_HDMI_TX] = &g12a_hdmi_tx.hw,
> [CLKID_HDMI_SEL] = &g12a_hdmi_sel.hw,
> @@ -4632,10 +4666,12 @@ static struct clk_hw *g12b_hw_clks[] = {
> [CLKID_VCLK2_DIV12] = &g12a_vclk2_div12.hw,
> [CLKID_CTS_ENCI_SEL] = &g12a_cts_enci_sel.hw,
> [CLKID_CTS_ENCP_SEL] = &g12a_cts_encp_sel.hw,
> + [CLKID_CTS_ENCL_SEL] = &g12a_cts_encl_sel.hw,
> [CLKID_CTS_VDAC_SEL] = &g12a_cts_vdac_sel.hw,
> [CLKID_HDMI_TX_SEL] = &g12a_hdmi_tx_sel.hw,
> [CLKID_CTS_ENCI] = &g12a_cts_enci.hw,
> [CLKID_CTS_ENCP] = &g12a_cts_encp.hw,
> + [CLKID_CTS_ENCL] = &g12a_cts_encl.hw,
> [CLKID_CTS_VDAC] = &g12a_cts_vdac.hw,
> [CLKID_HDMI_TX] = &g12a_hdmi_tx.hw,
> [CLKID_HDMI_SEL] = &g12a_hdmi_sel.hw,
> @@ -4892,10 +4928,12 @@ static struct clk_hw *sm1_hw_clks[] = {
> [CLKID_VCLK2_DIV12] = &g12a_vclk2_div12.hw,
> [CLKID_CTS_ENCI_SEL] = &g12a_cts_enci_sel.hw,
> [CLKID_CTS_ENCP_SEL] = &g12a_cts_encp_sel.hw,
> + [CLKID_CTS_ENCL_SEL] = &g12a_cts_encl_sel.hw,
> [CLKID_CTS_VDAC_SEL] = &g12a_cts_vdac_sel.hw,
> [CLKID_HDMI_TX_SEL] = &g12a_hdmi_tx_sel.hw,
> [CLKID_CTS_ENCI] = &g12a_cts_enci.hw,
> [CLKID_CTS_ENCP] = &g12a_cts_encp.hw,
> + [CLKID_CTS_ENCL] = &g12a_cts_encl.hw,
> [CLKID_CTS_VDAC] = &g12a_cts_vdac.hw,
> [CLKID_HDMI_TX] = &g12a_hdmi_tx.hw,
> [CLKID_HDMI_SEL] = &g12a_hdmi_sel.hw,
> @@ -5123,10 +5161,12 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
> &g12a_vclk2_div12_en,
> &g12a_cts_enci_sel,
> &g12a_cts_encp_sel,
> + &g12a_cts_encl_sel,
> &g12a_cts_vdac_sel,
> &g12a_hdmi_tx_sel,
> &g12a_cts_enci,
> &g12a_cts_encp,
> + &g12a_cts_encl,
> &g12a_cts_vdac,
> &g12a_hdmi_tx,
> &g12a_hdmi_sel,

\
 
 \ /
  Last update: 2023-08-04 12:05    [W:0.082 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site