lkml.org 
[lkml]   [2023]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v7 5/9] drm/meson: gate px_clk when setting rate
Disable the px_clk when setting the rate to recover a fully
configured and correctly reset VCLK clock tree after the rate
is set.

Fixes: 77d9e1e6b846 ("drm/meson: add support for MIPI-DSI transceiver")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
drivers/gpu/drm/meson/meson_dw_mipi_dsi.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
index 57447abf1a29..e995dff8c976 100644
--- a/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
+++ b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
@@ -94,6 +94,7 @@ static int dw_mipi_dsi_phy_init(void *priv_data)
return ret;
}

+ clk_disable_unprepare(mipi_dsi->px_clk);
ret = clk_set_rate(mipi_dsi->px_clk, mipi_dsi->mode->clock * 1000);

if (ret) {
@@ -102,6 +103,12 @@ static int dw_mipi_dsi_phy_init(void *priv_data)
return ret;
}

+ ret = clk_prepare_enable(mipi_dsi->px_clk);
+ if (ret) {
+ dev_err(mipi_dsi->dev, "Failed to enable DSI Pixel clock (ret %d)\n", ret);
+ return ret;
+ }
+
switch (mipi_dsi->dsi_device->format) {
case MIPI_DSI_FMT_RGB888:
dpi_data_format = DPI_COLOR_24BIT;
--
2.34.1

\
 
 \ /
  Last update: 2023-08-03 14:05    [W:0.058 / U:2.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site