lkml.org 
[lkml]   [2023]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] net/ethernet/realtek: Add Realtek automotive PCIe driver
Thu, Aug 03, 2023 at 10:25:13AM CEST, justinlai0215@realtek.com wrote:
>This patch is to add the ethernet device driver for the PCIe interface of Realtek Automotive Ethernet Switch,
>applicable to RTL9054, RTL9068, RTL9072, RTL9075, RTL9068, RTL9071.
>
>Signed-off-by: justinlai0215 <justinlai0215@realtek.com>

[...]


>+
>+static long rtase_swc_ioctl(struct file *p_file, unsigned int cmd, unsigned long arg)

There are *MANY* thing wrong in this patch spotted just during 5 minutes
skimming over the code, but this definitelly tops all of them.
I didn't see so obvious kernel bypass attempt for a long time. Ugh, you
can't be serious :/

I suggest to you take couple of rounds of consulting the patch with
some skilled upstream developer internaly before you make another
submission in order not not to waste time of reviewers.


>+{
>+ long rc = 0;
>+ struct rtase_swc_cmd_t sw_cmd;
>+
>+ (void)p_file;
>+
>+ if (rtase_swc_device.init_flag == 1u) {
>+ rc = -ENXIO;
>+ goto out;
>+ }
>+
>+ rc = (s64)(copy_from_user(&sw_cmd, (void *)arg, sizeof(struct rtase_swc_cmd_t)));
>+
>+ if (rc != 0) {
>+ SWC_DRIVER_INFO("rtase_swc copy_from_user failed.");
>+ } else {
>+ switch (cmd) {
>+ case SWC_CMD_REG_GET:
>+ rtase_swc_reg_get(&sw_cmd);
>+ rc = (s64)(copy_to_user((void *)arg, &sw_cmd,
>+ sizeof(struct rtase_swc_cmd_t)));
>+ break;
>+
>+ case SWC_CMD_REG_SET:
>+ rtase_swc_reg_set(&sw_cmd);
>+ rc = (s64)(copy_to_user((void *)arg, &sw_cmd,
>+ sizeof(struct rtase_swc_cmd_t)));
>+ break;
>+
>+ default:
>+ rc = -ENOTTY;
>+ break;
>+ }
>+ }
>+
>+out:
>+ return rc;
>+}

[...]

\
 
 \ /
  Last update: 2023-08-03 10:58    [W:0.068 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site