lkml.org 
[lkml]   [2023]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 09/14] I2C: sis5595: Do PCI error checks on own line
Date
Instead of if conditions with line splits, use the usual error handling
pattern with a separate variable to improve readability.

No functional changes intended.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/i2c/busses/i2c-sis5595.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index c793a5c14cda..486f1e9dfb74 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -175,11 +175,11 @@ static int sis5595_setup(struct pci_dev *SIS5595_dev)

if (force_addr) {
dev_info(&SIS5595_dev->dev, "forcing ISA address 0x%04X\n", sis5595_base);
- if (pci_write_config_word(SIS5595_dev, ACPI_BASE, sis5595_base)
- != PCIBIOS_SUCCESSFUL)
+ retval = pci_write_config_word(SIS5595_dev, ACPI_BASE, sis5595_base);
+ if (retval != PCIBIOS_SUCCESSFUL)
goto error;
- if (pci_read_config_word(SIS5595_dev, ACPI_BASE, &a)
- != PCIBIOS_SUCCESSFUL)
+ retval = pci_read_config_word(SIS5595_dev, ACPI_BASE, &a);
+ if (retval != PCIBIOS_SUCCESSFUL)
goto error;
if ((a & ~(SIS5595_EXTENT - 1)) != sis5595_base) {
/* doesn't work for some chips! */
@@ -188,16 +188,16 @@ static int sis5595_setup(struct pci_dev *SIS5595_dev)
}
}

- if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val)
- != PCIBIOS_SUCCESSFUL)
+ retval = pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val);
+ if (retval != PCIBIOS_SUCCESSFUL)
goto error;
if ((val & 0x80) == 0) {
dev_info(&SIS5595_dev->dev, "enabling ACPI\n");
- if (pci_write_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, val | 0x80)
- != PCIBIOS_SUCCESSFUL)
+ retval = pci_write_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, val | 0x80);
+ if (retval != PCIBIOS_SUCCESSFUL)
goto error;
- if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val)
- != PCIBIOS_SUCCESSFUL)
+ retval = pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val);
+ if (retval != PCIBIOS_SUCCESSFUL)
goto error;
if ((val & 0x80) == 0) {
/* doesn't work for some chips? */
--
2.30.2
\
 
 \ /
  Last update: 2023-08-24 15:43    [W:0.150 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site