lkml.org 
[lkml]   [2023]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 06/14] hwmon: (vt8231) Do PCI error checks on own line
Date
Instead of if conditions with line splits, use the usual error handling
pattern with a separate variable to improve readability.

No functional changes intended.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/hwmon/vt8231.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c
index b7c6392ba673..16bc16d33cd1 100644
--- a/drivers/hwmon/vt8231.c
+++ b/drivers/hwmon/vt8231.c
@@ -971,13 +971,15 @@ static int vt8231_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
u16 address, val;
+ int ret;
+
if (force_addr) {
address = force_addr & 0xff00;
dev_warn(&dev->dev, "Forcing ISA address 0x%x\n",
address);

- if (PCIBIOS_SUCCESSFUL !=
- pci_write_config_word(dev, VT8231_BASE_REG, address | 1))
+ ret = pci_write_config_word(dev, VT8231_BASE_REG, address | 1);
+ if (ret != PCIBIOS_SUCCESSFUL)
return -ENODEV;
}

@@ -997,9 +999,8 @@ static int vt8231_pci_probe(struct pci_dev *dev,

if (!(val & 0x0001)) {
dev_warn(&dev->dev, "enabling sensors\n");
- if (PCIBIOS_SUCCESSFUL !=
- pci_write_config_word(dev, VT8231_ENABLE_REG,
- val | 0x0001))
+ ret = pci_write_config_word(dev, VT8231_ENABLE_REG, val | 0x1);
+ if (ret != PCIBIOS_SUCCESSFUL)
return -ENODEV;
}

--
2.30.2
\
 
 \ /
  Last update: 2023-08-24 15:42    [W:0.348 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site