lkml.org 
[lkml]   [2023]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 05/14] hwmon: (via686a) Do PCI error checks on own line
Date
Instead of if conditions with line splits, use the usual error handling
pattern with a separate variable to improve readability.

No functional changes intended.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/hwmon/via686a.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index 37d7374896f6..407933d6e425 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -855,16 +855,17 @@ static int via686a_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
u16 address, val;
+ int ret;

if (force_addr) {
address = force_addr & ~(VIA686A_EXTENT - 1);
dev_warn(&dev->dev, "Forcing ISA address 0x%x\n", address);
- if (PCIBIOS_SUCCESSFUL !=
- pci_write_config_word(dev, VIA686A_BASE_REG, address | 1))
+ ret = pci_write_config_word(dev, VIA686A_BASE_REG, address | 1);
+ if (ret != PCIBIOS_SUCCESSFUL)
return -ENODEV;
}
- if (PCIBIOS_SUCCESSFUL !=
- pci_read_config_word(dev, VIA686A_BASE_REG, &val))
+ ret = pci_read_config_word(dev, VIA686A_BASE_REG, &val);
+ if (ret != PCIBIOS_SUCCESSFUL)
return -ENODEV;

address = val & ~(VIA686A_EXTENT - 1);
@@ -874,8 +875,8 @@ static int via686a_pci_probe(struct pci_dev *dev,
return -ENODEV;
}

- if (PCIBIOS_SUCCESSFUL !=
- pci_read_config_word(dev, VIA686A_ENABLE_REG, &val))
+ ret = pci_read_config_word(dev, VIA686A_ENABLE_REG, &val);
+ if (ret != PCIBIOS_SUCCESSFUL)
return -ENODEV;
if (!(val & 0x0001)) {
if (!force_addr) {
@@ -886,9 +887,8 @@ static int via686a_pci_probe(struct pci_dev *dev,
}

dev_warn(&dev->dev, "Enabling sensors\n");
- if (PCIBIOS_SUCCESSFUL !=
- pci_write_config_word(dev, VIA686A_ENABLE_REG,
- val | 0x0001))
+ ret = pci_write_config_word(dev, VIA686A_ENABLE_REG, val | 0x1);
+ if (ret != PCIBIOS_SUCCESSFUL)
return -ENODEV;
}

--
2.30.2
\
 
 \ /
  Last update: 2023-08-24 15:42    [W:0.198 / U:1.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site