lkml.org 
[lkml]   [2023]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] PCI: j721e: Delay 100ms T_PVPERL from power stable to PERST# inactive
Date
As per the PCIe Card Electromechanical specification REV. 5.0, PERST#
signal should be de-asserted after minimum 100ms from the time power-rails
become stable. So, to ensure 100ms delay to give sufficient time for
power-rails and refclk to become stable, change delay from 100us to 100ms.

From PCIe Card Electromechanical specification REV. 5.0 section 2.9.2:
TPVPERL: Power stable to PERST# inactive - 100ms

Fixes: f3e25911a430 ("PCI: j721e: Add TI J721E PCIe driver")
Signed-off-by: Achal Verma <a-verma1@ti.com>
---

Changes from v2:
* Fix commit message.

Change from v1:
* Add macro for delay value.

drivers/pci/controller/cadence/pci-j721e.c | 11 +++++------
drivers/pci/pci.h | 2 ++
2 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index e70213c9060a..32b6a7dc3cff 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -498,14 +498,13 @@ static int j721e_pcie_probe(struct platform_device *pdev)

/*
* "Power Sequencing and Reset Signal Timings" table in
- * PCI EXPRESS CARD ELECTROMECHANICAL SPECIFICATION, REV. 3.0
- * indicates PERST# should be deasserted after minimum of 100us
- * once REFCLK is stable. The REFCLK to the connector in RC
- * mode is selected while enabling the PHY. So deassert PERST#
- * after 100 us.
+ * PCI EXPRESS CARD ELECTROMECHANICAL SPECIFICATION, REV. 5.0
+ * indicates PERST# should be deasserted after minimum of 100ms
+ * after power rails achieve specified operating limits and
+ * within this period reference clock should also become stable.
*/
if (gpiod) {
- usleep_range(100, 200);
+ msleep(PCIE_TPVPERL_DELAY_MS);
gpiod_set_value_cansleep(gpiod, 1);
}

diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index a4c397434057..6ab2367e5867 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -13,6 +13,8 @@

#define PCIE_LINK_RETRAIN_TIMEOUT_MS 1000

+#define PCIE_TPVPERL_DELAY_MS 100 /* see PCIe CEM r5.0, sec 2.9.2 */
+
extern const unsigned char pcie_link_speed[];
extern bool pci_early_dump;

--
2.25.1
\
 
 \ /
  Last update: 2023-07-07 11:53    [W:0.077 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site