Messages in this thread Patch in this message | | | From | Mark Brown <> | Date | Fri, 28 Jul 2023 23:51:03 +0100 | Subject | [PATCH v2] net: netsec: Ignore 'phy-mode' on SynQuacer in DT mode |
| |
As documented in acd7aaf51b20 ("netsec: ignore 'phy-mode' device property on ACPI systems") the SocioNext SynQuacer platform ships with firmware defining the PHY mode as RGMII even though the physical configuration of the PHY is for TX and RX commits. Since bbc4d71d63549bc ("net: phy: realtek: fix rtl8211e rx/tx delay config") this has caused misconfiguration of the PHY, rendering the network unusable.
This was worked around for ACPI by ignoring the phy-mode property but the system is also used with DT. For DT instead if we're running on a SynQuacer force a working PHY mode, as well as the standard EDK2 firmware with DT there are also some of these systems that use u-boot and might not initialise the PHY if not netbooting. Newer firmware imagaes for at least EDK2 are available from Linaro so print a warning when doing this.
Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Mark Brown <broonie@kernel.org> --- Changes in v2: - Unlike ACPI force what appears to be the correct mode, there are u-boot firmwares which might not configure the PHY. - Link to v1: https://lore.kernel.org/r/20230727-synquacer-net-v1-1-4d7f5c4cc8d9@kernel.org --- drivers/net/ethernet/socionext/netsec.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c index 2d7347b71c41..cdb05db3d6ac 100644 --- a/drivers/net/ethernet/socionext/netsec.c +++ b/drivers/net/ethernet/socionext/netsec.c @@ -1851,6 +1851,17 @@ static int netsec_of_probe(struct platform_device *pdev, return err; } + /* + * SynQuacer is physically configured with TX and RX delays + * but the standard firwmare claimed otherwise for a long + * time, ignore it. + */ + if (of_machine_is_compatible("socionext,developer-box") && + priv->phy_interface != PHY_INTERFACE_MODE_RGMII_ID) { + dev_warn(&pdev->dev, "Outdated firmware reports incorrect PHY mode, overriding\n"); + priv->phy_interface = PHY_INTERFACE_MODE_RGMII_ID; + } + priv->phy_np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0); if (!priv->phy_np) { dev_err(&pdev->dev, "missing required property 'phy-handle'\n"); --- base-commit: 6eaae198076080886b9e7d57f4ae06fa782f90ef change-id: 20230727-synquacer-net-e241f34baceb Best regards, -- Mark Brown <broonie@kernel.org>
| |