lkml.org 
[lkml]   [2023]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5] i2c: imx-lpi2c: return -EINVAL when i2c peripheral clk doesn't work
Date
From: Carlos Song <carlos.song@nxp.com>

On MX8X platforms, the default clock rate is 0 if without explicit
clock setting in dts nodes. I2c can't work when i2c peripheral clk
rate is 0.

Add a i2c peripheral clk rate check before configuring the clock
register. When i2c peripheral clk rate is 0 and directly return
-EINVAL.

Signed-off-by: Carlos Song <carlos.song@nxp.com>
---
Changes for V5:
- modify commit log
- modify Signed-off-by list
---
drivers/i2c/busses/i2c-imx-lpi2c.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index c3287c887c6f..150d923ca7f1 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -209,6 +209,9 @@ static int lpi2c_imx_config(struct lpi2c_imx_struct *lpi2c_imx)
lpi2c_imx_set_mode(lpi2c_imx);

clk_rate = clk_get_rate(lpi2c_imx->clks[0].clk);
+ if (!clk_rate)
+ return -EINVAL;
+
if (lpi2c_imx->mode == HS || lpi2c_imx->mode == ULTRA_FAST)
filt = 0;
else
--
2.34.1
\
 
 \ /
  Last update: 2023-07-26 11:22    [W:0.034 / U:0.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site