lkml.org 
[lkml]   [2023]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 2/2] dt-bindings: hwmon: add renesas,isl28022
From
On 7/26/23 09:14, Krzysztof Kozlowski wrote:
> On 26/07/2023 17:22, Carsten Spieß wrote:
>> Add dt-bindings for Renesase ISL28022 power monitor.
>>
>> Signed-off-by: Carsten Spieß <mail@carsten-spiess.de>
>> ---
>
> Thank you for your patch. There is something to discuss/improve.
>
>
>> .../bindings/hwmon/renesas,isl28022.yaml | 67 +++++++++++++++++++
>> MAINTAINERS | 1 +
>> 2 files changed, 68 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/hwmon/renesas,isl28022.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/hwmon/renesas,isl28022.yaml b/Documentation/devicetree/bindings/hwmon/renesas,isl28022.yaml
>> new file mode 100644
>> index 000000000000..5ecf892db269
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/hwmon/renesas,isl28022.yaml
>> @@ -0,0 +1,67 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +
>
> No blank line.
>
>> +$id: http://devicetree.org/schemas/hwmon/renesas,isl28022.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Renesas ISL28022 power monitor
>> +
>> +maintainers:
>> + - Carsten Spieß <mail@carsten-spiess.de>
>> +
>> +description: |
>> + The ISL28022 is a power monitor with I2C interface. The device monitors
>> + voltage, current via shunt resistor and calculated power.
>> +
>> + Datasheets:
>> + https://www.renesas.com/us/en/www/doc/datasheet/isl28022.pdf
>> +
>> +Required properties:
>> + compatible:
>> + enum:
>> + - renesas,isl28022
>> +
>> + reg:
>> + maxItems: 1
>> +
>> +Optional properties:
>
> It does not look like you tested the bindings, at least after quick
> look. Please run `make dt_binding_check` (see
> Documentation/devicetree/bindings/writing-schema.rst for instructions).
> Maybe you need to update your dtschema and yamllint.
>
> These are "properties"
>
>> + shunt-resistor-micro-ohms:
>> + description:
>> + Shunt resistor value in micro-Ohm
>> + defaults to <0> when not set
>> + monitoring of current and power not supported when <0>
>> +
>> + shunt-gain:
>
> 1. Missing vendor prefix (does not look like generic property)
> 2. -microvolt
>
>> + description:
>> + Shunt gain to scale maximal shunt voltage to
>> + 40mV, 80mV, 160mV, 320mV
>> + defaults to <8> (320mV) when not set
>
> And then enum is for 40, 80, 160 and 320.
>
>> + enum: [1, 2, 4, 8]
>> +
>> + average:
>> + description: |
>> + Number of samples to be used to report voltage, current and power values.
>> + defaults to <0> when not set
>> + enum: [0, 1, 2, 4, 8, 16, 32, 64, 128]
>
> I am sure hwmon has some property for this. Are you sure it is called
> "average"?
>

Something with samples. adi,power-sample-average is similar. Others
use average-samples, qcom,avg-samples, touchscreen-average-samples.

Guenter

>> +
>> +required:
>> + - compatible
>> + - reg
>> +
>> +additionalProperties: false
>> +
>
>
> Best regards,
> Krzysztof
>

\
 
 \ /
  Last update: 2023-07-26 20:19    [W:0.374 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site