lkml.org 
[lkml]   [2023]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V3 6/7] drm: bridge: samsung-dsim: Support non-burst mode
From
On 02.05.23 03:07, Adam Ford wrote:
> The high-speed clock is hard-coded to the burst-clock
> frequency specified in the device tree. However, when
> using devices like certain bridge chips without burst mode
> and varying resolutions and refresh rates, it may be
> necessary to set the high-speed clock dynamically based
> on the desired pixel clock for the connected device.
>
> This also removes the need to set a clock speed from
> the device tree for non-burst mode operation, since the
> pixel clock rate is the rate requested from the attached
> device like an HDMI bridge chip. This should have no
> impact for people using burst-mode and setting the burst
> clock rate is still required for those users.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
> Tested-by: Chen-Yu Tsai <wenst@chromium.org>

Tested on Kontron BL i.MX8MM with SN65DSI84 and ADV7535 bridges.

Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>

\
 
 \ /
  Last update: 2023-05-03 17:44    [W:0.217 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site