lkml.org 
[lkml]   [2023]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/3] thermal/drivers/mediatek/lvts_thermal: Handle IRQ on all controllers
From
Il 28/04/23 21:53, Nícolas F. R. A. Prado ha scritto:
> There is a single IRQ handler for each LVTS thermal domain, and it is
> supposed to check each of its underlying controllers for the origin of
> the interrupt and clear its status. However due to a typo, only the
> first controller was ever being handled, which resulted in the interrupt
> never being cleared when it happened on the other controllers. Add the
> missing index so interrupts are handled for all controllers.
>
> Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>


\
 
 \ /
  Last update: 2023-05-03 17:09    [W:0.078 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site