lkml.org 
[lkml]   [2023]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v5 0/3] Add support for ESM
Date
ESM (Error Signaling Module) is a fundamental IP responsible for
handling safety events. The driver currently present in U-Boot is
responsible for configuring ESM. This patch series adds dt-binding and
nodes for J721E and J7200. This goes towards end goal of having DTB sync
with that of U-Boot as well as ensuring completeness of hardware
description in devicetree.

Changes in v5:
- added esm node to k3-j721e-main.dtsi

Changes in v4:
- hwmon/ti,j721e-esm.yaml -> misc/ti,j721e-esm.yaml
- retained tag by Krzysztof for dt-binding

Changes in v3:
- formatting changes in dt-binding
- modified example in dt-binding cbass_main -> bus
- changed subject misc -> hwmon

Changes in v2:
- misc/esm-k3.yaml -> hwmon/ti,j721e-esm.yaml
- formatting changes in dt-binding
- modified example in dt-binding

Neha Malcom Francis (3):
dt-bindings: misc: esm: Add ESM support for TI K3 devices
arm64: dts: ti: k3-j721e: Add ESM support
arm64: dts: ti: k3-j7200: Add ESM support

.../bindings/misc/ti,j721e-esm.yaml | 53 +++++++++++++++++++
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 6 +++
arch/arm64/boot/dts/ti/k3-j7200.dtsi | 1 +
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 6 +++
arch/arm64/boot/dts/ti/k3-j721e.dtsi | 1 +
5 files changed, 67 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml

--
2.34.1

\
 
 \ /
  Last update: 2023-05-03 14:33    [W:0.057 / U:2.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site