Messages in this thread | | | Date | Wed, 12 Apr 2023 19:21:25 +0300 | Subject | Re: Aw: Re: Re: Re: Re: [PATCH v3 0/5] arm: dts: mt7623: relocate gmacs, mt7530 switch, and add | From | Arınç ÜNAL <> |
| |
On 12.04.2023 18:11, Frank Wunderlich wrote: > Hi > >> Gesendet: Mittwoch, 12. April 2023 um 16:31 Uhr >> Von: "Arınç ÜNAL" <arinc.unal@arinc9.com> >>> looks good so far, but i have not managed how to change dsa master from the preferred port (eth0) to the second one... >>> any idea how the correct syntax is for iproute2? >> >> https://www.kernel.org/doc/html/latest/networking/dsa/configuration.html#affinity-of-user-ports-to-cpu-ports >> >> In short: ip link set lan0 type dsa conduit eth1 > > thanks, it changes the master when i upgrade iproute to 6.1 (from debian bullseye-backports), but i cannot do any traffic on it after switching to gmac1... > > 5: wan@eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 > link/ether f2:d2:51:56:cd:3d brd ff:ff:ff:ff:ff:ff > inet 192.168.0.11/24 scope global wan > valid_lft forever preferred_lft forever > > see no p5-TX/gmac-rx > > root@bpi-r2:~# ethtool -S eth1 > NIC statistics: > tx_bytes: 5156 > tx_packets: 61 > tx_skip: 0 > tx_collisions: 0 > rx_bytes: 0 > rx_packets: 0 > rx_overflow: 0 > rx_fcs_errors: 0 > rx_short_errors: 0 > rx_long_errors: 0 > rx_checksum_errors: 0 > rx_flow_control_packets: 0 > rx_xdp_redirect: 0 > rx_xdp_pass: 0 > rx_xdp_drop: 0 > rx_xdp_tx: 0 > rx_xdp_tx_errors: 0 > tx_xdp_xmit: 0 > tx_xdp_xmit_errors: 0 > p05_TxDrop: 0 > p05_TxCrcErr: 0 > p05_TxUnicast: 0 > p05_TxMulticast: 0 > p05_TxBroadcast: 0 > p05_TxCollision: 0 > p05_TxSingleCollision: 0 > p05_TxMultipleCollision: 0 > p05_TxDeferred: 0 > p05_TxLateCollision: 0 > p05_TxExcessiveCollistion: 0 > p05_TxPause: 0 > p05_TxPktSz64: 0 > p05_TxPktSz65To127: 0 > p05_TxPktSz128To255: 0 > p05_TxPktSz256To511: 0 > p05_TxPktSz512To1023: 0 > p05_Tx1024ToMax: 0 > p05_TxBytes: 0 > p05_RxDrop: 0 > p05_RxFiltering: 16 > p05_RxUnicast: 11 > p05_RxMulticast: 38 > p05_RxBroadcast: 12 > p05_RxAlignErr: 0 > p05_RxCrcErr: 0 > p05_RxUnderSizeErr: 0 > p05_RxFragErr: 0 > p05_RxOverSzErr: 0 > p05_RxJabberErr: 0 > p05_RxPause: 0 > p05_RxPktSz64: 17 > p05_RxPktSz65To127: 44 > p05_RxPktSz128To255: 0 > p05_RxPktSz256To511: 0 > p05_RxPktSz512To1023: 0 > p05_RxPktSz1024ToMax: 0 > p05_RxBytes: 5156 > p05_RxCtrlDrop: 0 > p05_RxIngressDrop: 0 > p05_RxArlDrop: 0 > > maybe i miss something? > > i'm not sure it is a problem with richards Patch or p5/gmac1
Did you apply the vlan and flooding fix patches from Richard?
Arınç
| |