Messages in this thread | | | From | Frank Wunderlich <> | Subject | Aw: Re: Re: Re: Re: [PATCH v3 0/5] arm: dts: mt7623: relocate gmacs, mt7530 switch, and add | Date | Wed, 12 Apr 2023 17:11:17 +0200 |
| |
Hi
> Gesendet: Mittwoch, 12. April 2023 um 16:31 Uhr > Von: "Arınç ÜNAL" <arinc.unal@arinc9.com> > > looks good so far, but i have not managed how to change dsa master from the preferred port (eth0) to the second one... > > any idea how the correct syntax is for iproute2? > > https://www.kernel.org/doc/html/latest/networking/dsa/configuration.html#affinity-of-user-ports-to-cpu-ports > > In short: ip link set lan0 type dsa conduit eth1
thanks, it changes the master when i upgrade iproute to 6.1 (from debian bullseye-backports), but i cannot do any traffic on it after switching to gmac1...
5: wan@eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether f2:d2:51:56:cd:3d brd ff:ff:ff:ff:ff:ff inet 192.168.0.11/24 scope global wan valid_lft forever preferred_lft forever
see no p5-TX/gmac-rx
root@bpi-r2:~# ethtool -S eth1 NIC statistics: tx_bytes: 5156 tx_packets: 61 tx_skip: 0 tx_collisions: 0 rx_bytes: 0 rx_packets: 0 rx_overflow: 0 rx_fcs_errors: 0 rx_short_errors: 0 rx_long_errors: 0 rx_checksum_errors: 0 rx_flow_control_packets: 0 rx_xdp_redirect: 0 rx_xdp_pass: 0 rx_xdp_drop: 0 rx_xdp_tx: 0 rx_xdp_tx_errors: 0 tx_xdp_xmit: 0 tx_xdp_xmit_errors: 0 p05_TxDrop: 0 p05_TxCrcErr: 0 p05_TxUnicast: 0 p05_TxMulticast: 0 p05_TxBroadcast: 0 p05_TxCollision: 0 p05_TxSingleCollision: 0 p05_TxMultipleCollision: 0 p05_TxDeferred: 0 p05_TxLateCollision: 0 p05_TxExcessiveCollistion: 0 p05_TxPause: 0 p05_TxPktSz64: 0 p05_TxPktSz65To127: 0 p05_TxPktSz128To255: 0 p05_TxPktSz256To511: 0 p05_TxPktSz512To1023: 0 p05_Tx1024ToMax: 0 p05_TxBytes: 0 p05_RxDrop: 0 p05_RxFiltering: 16 p05_RxUnicast: 11 p05_RxMulticast: 38 p05_RxBroadcast: 12 p05_RxAlignErr: 0 p05_RxCrcErr: 0 p05_RxUnderSizeErr: 0 p05_RxFragErr: 0 p05_RxOverSzErr: 0 p05_RxJabberErr: 0 p05_RxPause: 0 p05_RxPktSz64: 17 p05_RxPktSz65To127: 44 p05_RxPktSz128To255: 0 p05_RxPktSz256To511: 0 p05_RxPktSz512To1023: 0 p05_RxPktSz1024ToMax: 0 p05_RxBytes: 5156 p05_RxCtrlDrop: 0 p05_RxIngressDrop: 0 p05_RxArlDrop: 0
maybe i miss something?
i'm not sure it is a problem with richards Patch or p5/gmac1
> > at least vladimirs patch should be included when applying this series > > I'm currently cleaning up the DSA driver, I'll get to this at some point.
regards Frank
| |