Messages in this thread Patch in this message | | | From | arinc9.unal@gmail ... | Subject | [PATCH net 7/7] net: dsa: mt7530: remove pad_setup function pointer | Date | Sun, 26 Mar 2023 17:08:18 +0300 |
| |
From: Arınç ÜNAL <arinc.unal@arinc9.com>
The pad_setup function pointer was introduced with 88bdef8be9f6 ("net: dsa: mt7530: Extend device data ready for adding a new hardware"). It was being used to set up the core clock and port 6 of the MT7530 switch, and pll of the MT7531 switch.
All of these were moved to more appropriate locations so this function pointer hasn't got a use anymore. Remove it.
Fixes: 88bdef8be9f6 ("net: dsa: mt7530: Extend device data ready for adding a new hardware") Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> --- drivers/net/dsa/mt7530.c | 30 ++---------------------------- drivers/net/dsa/mt7530.h | 3 --- 2 files changed, 2 insertions(+), 31 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 8d49803f7522..83dcd888f82b 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -493,12 +493,6 @@ mt7530_setup_port6(struct dsa_switch *ds, phy_interface_t interface) return 0; } -static int -mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) -{ - return 0; -} - static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv) { u32 val; @@ -508,12 +502,6 @@ static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv) return (val & PAD_DUAL_SGMII_EN) != 0; } -static int -mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface) -{ - return 0; -} - static void mt7531_pll_setup(struct mt7530_priv *priv) { @@ -2516,14 +2504,6 @@ static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port, } } -static int -mt753x_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state) -{ - struct mt7530_priv *priv = ds->priv; - - return priv->info->pad_setup(ds, state->interface); -} - static int mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface) @@ -2798,8 +2778,6 @@ mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, if (priv->p6_interface == state->interface) break; - mt753x_pad_setup(ds, state); - if (mt753x_mac_config(ds, port, mode, state) < 0) goto unsupported; @@ -3215,7 +3193,6 @@ static const struct mt753x_info mt753x_table[] = { .phy_write_c22 = mt7530_phy_write_c22, .phy_read_c45 = mt7530_phy_read_c45, .phy_write_c45 = mt7530_phy_write_c45, - .pad_setup = mt7530_pad_clk_setup, .mac_port_get_caps = mt7530_mac_port_get_caps, .mac_port_config = mt7530_mac_config, }, @@ -3227,7 +3204,6 @@ static const struct mt753x_info mt753x_table[] = { .phy_write_c22 = mt7530_phy_write_c22, .phy_read_c45 = mt7530_phy_read_c45, .phy_write_c45 = mt7530_phy_write_c45, - .pad_setup = mt7530_pad_clk_setup, .mac_port_get_caps = mt7530_mac_port_get_caps, .mac_port_config = mt7530_mac_config, }, @@ -3239,7 +3215,6 @@ static const struct mt753x_info mt753x_table[] = { .phy_write_c22 = mt7531_ind_c22_phy_write, .phy_read_c45 = mt7531_ind_c45_phy_read, .phy_write_c45 = mt7531_ind_c45_phy_write, - .pad_setup = mt7531_pad_setup, .cpu_port_config = mt7531_cpu_port_config, .mac_port_get_caps = mt7531_mac_port_get_caps, .mac_port_config = mt7531_mac_config, @@ -3297,9 +3272,8 @@ mt7530_probe(struct mdio_device *mdiodev) /* Sanity check if these required device operations are filled * properly. */ - if (!priv->info->sw_setup || !priv->info->pad_setup || - !priv->info->phy_read_c22 || !priv->info->phy_write_c22 || - !priv->info->mac_port_get_caps || + if (!priv->info->sw_setup || !priv->info->phy_read_c22 || + !priv->info->phy_write_c22 || !priv->info->mac_port_get_caps || !priv->info->mac_port_config) return -EINVAL; diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h index 6b2fc6290ea8..fd050d3110c6 100644 --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -754,8 +754,6 @@ struct mt753x_pcs { * @phy_write_c22: Holding the way writing PHY port using C22 * @phy_read_c45: Holding the way reading PHY port using C45 * @phy_write_c45: Holding the way writing PHY port using C45 - * @pad_setup: Holding the way setting up the bus pad for a certain - * MAC port * @phy_mode_supported: Check if the PHY type is being supported on a certain * port * @mac_port_validate: Holding the way to set addition validate type for a @@ -776,7 +774,6 @@ struct mt753x_info { int regnum); int (*phy_write_c45)(struct mt7530_priv *priv, int port, int devad, int regnum, u16 val); - int (*pad_setup)(struct dsa_switch *ds, phy_interface_t interface); int (*cpu_port_config)(struct dsa_switch *ds, int port); void (*mac_port_get_caps)(struct dsa_switch *ds, int port, struct phylink_config *config); -- 2.37.2
| |